I have a SD 16gb card that contains .mts files from my Canon S100 Hd camcorder. My card reader which is years old does see it in my PC but not on my Dual G5. I plugged it into the front usb slot and back one.. My mac does not see it. I tried the keyboard but it says it is too low power to use from there. How do I get the G5 to see it?
View 4 Replies
My new macpro ( 2014) can't detect SD card reader with all 4 USB port ! I try to test with macbook Pro it's work properly ! What wrong with my USB port ?
View 4 Replies View RelatedI simply can't take any of my pictures off of my SD card. I've tried using the USB cable that came with the camera itself, as well as a USB card reader. iPhoto, and the laptop itself does not recognize the card, or that there is any device mounted at all. I've also tried checking "External Disks" in Finder Preferences, didn't seem to work.
Info:MacBook Air, Mac OS X (10.7.3), Black Nuts
I've had a pleasant experience with my imac so far, and it read my SD card fine at first. For some reason I put my SD in the SD card reader and copied the pictures from it. I take it out and put it back in my camera. "The SD card cannot be formatted. It may be defective." Really? I put it back in my iMac. It doesn't mount. I check Finder and Disk Utility. Ya, it's nowhere. I put my other SD card in my iMac. Same issue. Now my camera won't read that one either. I put them in my sister's $300 netbook running Windows 7 Starter. Funny! It reads them! However, my camera still doesn't and my imac still doesn't. I try formatting them. No go. I've tried every format I can. They are just dead. Useless. My sister's computer can read them, and even format them, but something in that stupid iMac made my SD cards defective. I can buy new ones, but should I have to? I can't even see if they'll work through the camera while connected via USB because the camera won't even read them. I bought a Mac to avoid ridiculous problems like this. Was I wrong? Is it just a ticking time bomb like every other computer on the market? Should I immediately go buy a backup drive? If it's doing crazy stuff like this out of the blue, how can I trust it not to randomly crash? I think I overestimated Apple's competence. This should never happen. It actually made my SD cards defective.
View 5 Replies View RelatedI just got the apple mac pro raid card today, but after I connect it and all 4 SAS drives, the MAC OSX Installtion program can not detect the SAS at all, I open the RAID Utility but no dirve there, the battery is in charging status.
View 2 Replies View RelatedReally wanted to update my Powermac this year to a MacPro but as I'm getting married it's going to be an expensive year so I've decided to upgrade the G5 2.0 DP I already have.At the moment the kit I have is pretty good in that I have 1.5 gig of memory and 250gig of hard drive space but I'm open to suggestions.The G5 I have is the PCI version so I'm a bit limited as to what I can upgrade but the main area I'm looking at is with the graphics card. I had BTO the ATI 9650 256meg card but I'm looking for something better. I've just started to get into "World Of Warcraft" and would like the best graphics card that is value for money.
View 5 Replies View RelatedI just got a new mac pro dual quad core to replace my single dual core for work. Im trying to pull my Nividi Quadro 4500 out of my old machine that i had installed by apple in to my new machine. i get it all hoked in right but when i turn on my new machine it dosnt detect the display. Any suggestions?
View 5 Replies View Relatedhow to use it?
View 1 Replies View RelatedInstalled windows 7 today (geniune copy) to play the Star Trek Online open beta, managed to download and install it, but when I go to play it, it crashes. Went to performance information and tools and under graphics it says: Total Memory Not Detected and everything is 0MB apart from display adapter which says 6.1.7600.16385 and monitor resolution.
I have a 24" iMac 3.06Ghz with 8800 graphic card. Few weeks ago I had windows 7 installed for dragon age, ran like a charm, but I got rid of partition (dont ask why)
yes I have installed the bootcamp drivers!
I have a AMICROE 42-in-1 USB 2.0 Card Reader that I use to transfer pictures from my camera's memory stick (SanDisk Memory Stick PRO Duo 1.0 GB) to my mac. It always works but the last few times I have tried to use it it wont show up in iPhoto or anywhere else. I looked in disk utillity (which I think is the right place to look) but it is nowhere on my computer. What is wrong, what do I do? I also don't want to spend any money buying a new one or getting it fixed if it has a problem, but it is working coz the little blue light is coming on.
It has many different ports for different memory sticks and it works with some other cameras in different ports, I can't work out why it is doing this!
As the title says, I have a card reader that works great with a CF card, but the MBP won't recognize an SD card. This is a new problem for me. I also have an express card adapter for SD that won't read the card, either. I have tried 4 different SD cards, and these exact cards have worked for me in the recent past (within the past 2 months). They work fine in the camera. I also tried connecting the camera via usb, which was unsuccessful. I tried blowing air on the cards and the reader. I cannot get the cards to be read on my wife's macbook. This makes no sense to me, as it worked fine the last time I tried. I find it hard to believe that all cards are corrupt, or the cable is the problem because it reads the CF card.
View 16 Replies View RelatedI have a G4 PowerMac 400Mhz running OS 10.4.8. The graphics seem a bit slow at times and I was wondering if upgrading the video card from the current ATI 16MB to a GeForce2 32MB would help? I have 1GB of memory so I know I am good there.
View 6 Replies View RelatedI have a USB all in one card reader that doesn't seem to work when I connect it to my Macbook. It's an aluminium Macbook running snow leopard.
Ordinarily I would suspect that my �2.99 card reader is faulty and just buy a new one...however I also have an iMac, and it works perfectly with that.
Any ideas on what's wrong with my Macbook??
I have a MacBook Pro since september, which came with 10.6.3 installed. It worked perfect. Last Nov 20th I updated to 10.6.5 (from the automatic software update manager) and everything more or less ok, except for my SD Card slot which stopped reading any card.
I have checked it is not a card problem. I tried installing the 10.6.5Update Combo and it didn't work. I tried resetting the System Management Controller and nothing changed, nor any other method I've found on the web.
I would like to know if it is known a concrete fixing of this issue; otherwise I think the best thing to do is to downgrade back to 10.6.3, which was the originally installed Snow Leopard version.
Has someone tried to install a smart card reader GemPC Twin in Mac Os X Leopard ?
How to use it ?
Anyone have good luck with a specific card reader? Or are they all in general going to work?
View 1 Replies View RelatedI used to do DSLR photography with CF, but fell out of love with it and sold it, so now it's back to regular old SD for my point and shoot. I'm looking for a card reader that obviously supports SD, but I'd like some type of all-in-one so I can throw most anything at it. I'd also like it to be flush with the computer when inserted.
View 4 Replies View RelatedI recently bought an SD card and reader for my Macbook Pro. It was working fine for a good month or so but as I was copying something to the card today, an error message appeared which said something about not having the right privilege to copy the content over to the SD card. The SD card was unmounted (if that's the word you'd use) automatically. When I tried plugging it back in to try again, nothing happened. I've tried plugging it into my PC but it says the device I've plugged in is not recognisable. The SD card reader has a red light that goes on when you plug it in which doesn't switch on anymore.
I've put the SD card itself into my TV as I was copying some video onto it. 15 minutes of the video has been copied and it's playable which to me suggests that the SD card itself is fine? Is there any way I can get it working again? I don't really understand what's happened.
I am ready to purchase a MBA; however, I am in the Army and have to use the Army ID card (CAC card) to access certain areas on Army websites. Does anyone know if the software required to run the CAC card reader can run on the MBA OS or will I have to use Boot Camp or some other software to run MS Windows vista or 7?
Info:
MacBook Air, Mac OS X (10.7.3)
I have a few SD cards, but when i plug it into my macbook pro 15 in the card is read only. I am unable to write (i.e. move, delete..) frm the SD card. I've tried the lock at both positions both doesnt work. Also, the cards are fine when read on windows.
Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.7.3)
I have a iMac (Intel) desktop and also a Windows based PC. I use the newer Mac to process JPEG photos in Lightroom 3, but here's the catch: most of the time my older Sandisk ImageMate 8-in-1 CF reader does not show up in LR3 (I connect the USB plug directly to the back of the Mac's USB slot). It works just fine with the PC. So it may be a hardware problem and I am willing to invest in a new Mac compatible card reader. My Mac runs on OS X (Lion).Â
Info:
iMac, Mac OS X (10.7.2)
My wife's Mac Book Pro (around 18 months old) gets an error message when she hooks up our Canon camera. It says the USB is drawing to much power and has been disabled. She has downloaded 1000's of pictures without problems and now that message pops up. And she doesn't have anything extra plugged in since the last downlaod around a week ago. Also the SD card reader isn't working. When the card is plugged in nothing happens and we can't find the card in iphoto. So now she has no way to get the pictures on iphoto. It's not the cord or the card because I can download them without any problem on my Windows computer.
Info:
MacBook Pro
Lately, my macbook pro has not been recognizing my SD card reader. SD cards do not mount, and it looks like the computer is not recognizing the SD card reader at all (When I check About This Mac -> More Info -> System Report -> USB, the card reader does not show up). I've never had a problem before, in the ~3 years I've had this Macbook. I'm running Maverick.
Info:
MacBook Pro, OS X Mavericks (10.9.4), 2011 MacBook Pro
My SD card reader does not work and resetting the SMC has not fixed the problem...what do I do?
View 9 Replies View RelatedSo my mom's G5 (single 1.8) graphics card just pooped out on us.
Lot's of multi-colored lines show up on the screen at the same time and it never boots into OS X. Ran the CD Apple hardware test and the only error i got back was the video memory. So we're thinking about getting a new video card.
It has the factory card still in it and I can't really decide what kind of card needs to be purchased. I've been hunting around the internet and have found numerous conclusions that all seem to differ.
It's basically an AGP 8x slot. We don't need anything fancy just a replacement. There's an auction on ebay right now for the current card (nVidia GeForce FX 5200) but the auction has two in it and we only need one.
but anyway, if anyone could lead me in the right direction i'd really love to get my mom's mac up and running again.
I need to get an expresscard reader for my MBP that WILL read Sandisk Ultra II cards. I want one that fits flush or close to flush and that I will be able to leave in without freeze ups. I was going to buy this but it just got Deactivated...
[URL]
Is there one that works?
View 8 Replies View RelatedI really need to get hold of an Expresscard 34 - SDHC Card Reader for my MacBook Pro 15" late 2008. My Mid 2009 MBP has it all built in which is great. I have had a look on the net and they seem scarce. All of my SD cards are over 2GB in size, mostly 8GB so I need it to support SDHC. I would also love it to fit flush with the MBP and maybe be grey in colour! Please can someone help and let me know what model to 'google'
View 2 Replies View Relatedi miss the expresscard a lot on the 15", but i need as much portable CPU power as possible so upgraded to i7.? i was using expresscard slot for CF reader for my DSL now i never use the SD slotany adapter from CF -> SD port ?or USB port -> SD slot adapter?
View 1 Replies View RelatedI just erased everything off my Mac Pro and reconfigured everything (as new). I installed all my programs, primarily Aperture3 and Photoshop CS5 (using Leopard). I had no problem uploaded some photos into Aperture3 from a thumb drive using the USB port, but when I tried to upload photos from my card reader the MacPro does not recognize the card reader using the same USB port. I figured the problem was a bad card reader.
I tested it on my PC and it recognized the card reader and uploaded all the photos. Also, the card reader's green light turns on when attached to the MacPro, as if it is working and connected but it does not register in Finder or desktop to indicate that the card reader is installed. I even tried to upload directly from my Canon 7D and it also did NOT recognize the camera. Why would the MacPro recognize the thumb drive on the same USB port and not the card reader or the camera?
Info:
MacBookPro, MacPro DualQuad, Mac OS X (10.5.2)
