Hardware :: G5 Turns Off At Grey Apple Logo Screen
Dec 8, 2009Well I have managed to get the g5 tower dual 2.5ghz to boot up to the grey screen with the apple logo then it shuts itself down.
View 1 RepliesWell I have managed to get the g5 tower dual 2.5ghz to boot up to the grey screen with the apple logo then it shuts itself down.
View 1 RepliesThe little progress spinner thing below the apple just spins and spins. The computer said that several apps stopped responding and had to quit after falling asleep watching a movie in VLC, which had error logs that had frozen on the screen as well saying, "Computer too slow?" from dropped frames apparently. Not normal. Also, yesterday, when waking it up from the display shutting down, the whole screen was gray and smeared looking. There was nothing recognizable at all on the screen, and I hit the power button quickly for it to sleep, and back again and it worked fine for the rest of the day. Its a 1.66 Core Duo Mac mini w/ 2gb of RAM.
View 8 Replies View RelatedCame home from work the other day and my iMac (20" iMac from '07 / Snow Leopard) was frozen, did a hard restart and it booted up fine without much of a problem. Everything was running very sluggish so I began to verify the disc through utilities at which point it froze again, now whenever I restart I get stuck at a white screen with apple logo and something spinning underneath it. The longest I've let it sit at that screen is about an hour or so, it gets extremely hot though so I'm hesitant to leave it any longer.
I've tried a few suggestions already, safe mode with no luck, disc target onto my macbook with no luck and I've tried "/sbin/fsck/ -fy" at the command prompt which returns something along the lines of Harddrive can not be repaired. The most important thing to me right now is being able to access some of the files on there if it is not a total loss. I've back up about 2 months ago, so it wont be a total loss, but like I said, would prefer to salvage anything I can.
I deleted the entire vm folder and now my MacBook Pro won't get beyond the grey screen with the apple logo. I don't have any recovery discs with me. What can I do to rescue my MacBook Pro?
Info:MacBookPro, Mac OS X (10.7)
Mac book pro grey screen apple logo
Info:MacBook Pro (13-inch Early 2011), iOS 5.1.1, Mac book pro opening with grscreen
I was trying to install Windows XP Pro, but for some reason the it wasn't showing another HDD to install Windows on. So I quit the install, and restarted my computer. Now all that happens is the normal grey screen appears (with no Apple logo), then it goes to a black screen and has the blinking cursor (Kinda like DOS).
View 14 Replies View Relatedwhen i start up my macbook it goes the the gray screen with apple logo then the logo turns in to a circle with a line in it
Info:
MacBook
When i start the computer and the grey screen comes up with the apple logo etc., a grey "loading" bar has started appearing in the bottom of the screen. Takes a few minutes for it to go away. In the meantime the computer gets very hot and the fans are up to 6000 rpm. Then the os starts up, and I cannot download anything, due to the fact that it thinks my harddrive is full, though i have more than 100 gb of free space.I cant even download the 10.6.2 now due to the harddrive appears to be full
View 2 Replies View RelatedSometimes, when I turn on my iMac (10.6.2), the system will not load, you can see the grey screen but empty, no apple logo there. I have to force a shutdown pressing the power button and when I turn it on for the second time it will work properly.
It only happens once in a while but I cannot understand why, since nothing changes.
PS.- I have verified my disk with the disk utility and everything seems fine.
Hoping someone can help - my imac (approx 15-18 months old , intel) won't start.
Last night on shutting down DPP (canon Digital image software) was hanging and system asked me if I wanted to force quit it...sadly I had switched off my bluetooth mouse and , as usually once mouse turned off switching it back on it never re connects - why did I buy the bletooth mouse and keyboard ?, so I could not confirm yes force quit - is there no way of selecting with keyboard like there is in windows ?
So I switched off at power switch. Tried to re switch on - grey screen came up, apple logo, the little timer circle but after a while timer circle stopped and nothing further happened.
have tried several more times and now don't even get timer.
Macbook Pro was purchased in mid-late 2009 and is running on OS X 10.6. Today is suddenly stopped responding and so I turned it off. When I turned it back on it opend to the grey screen with the Apple logo and the loading icon and that is where it stayed. I have been searching for the answer on different forums but have yet to find a solution. My hard drive is appearing in the Disk Utility but not in the box when I try to reinstall OS X.
Info:MacBookPro, Mac OS X (10.6)
I had been using my iMac all night, when all of a sudden the bouncing beach ball appeared and everything became unresponsive, apart from the mouse cursor itself. It might be worth noting that a few hours prior to this, I plugged in an external hard drive to burn off a DVD. This external hard drive has two partitions, the first being a restored image of Leopard; and the second, my out of date backup ("yes, I know").
I subsequently restarted my machine, enjoyed the chime, pondered the excessively long start up and looked bemused at the Leopard Setup wizard. I realised that the restored Leopard partition had booted up instead of the internal disc. So, I unplugged the external drive, pressed reset on the iMac and was immediately greeted first by the reassuring chime, then by the Apple logo and a lingering grey screen and finally by a flashing dark folder icon with a question mark in the centre for eternity.
I tried rebooting a few more times. Same. I've been frantically Googling but only found the PRAM reset and a very frightening iMac disassembly guide. I've tried plugging the external drive back it, but it refuses to boot Leopard from that now. What can I do? I feel so helpless on a Mac, on a PC I'd at least be able to open the sucker up before panicking! I've been working on a client's flash web dev project for months, and not made a back up in about half that time. The website is supposed to be going live tomorrow! Luckily I have the site uploaded, but the entire source code is potentially lost, so in the long term this is a major catastrophe!
My MacBook Pro will not boot up any more. It just suddenly happened. It turns on and comes up to the gray screen with the apple logo and then the circle progress icon comes up and spins.
View 1 Replies View RelatedI own an iBook G4. I could not get it to boot up, it would just go to a grey screen with the apple symbol and a timer/clock that looked like a gear.FYI: I may provide more information than necessary in the text below. I'm not sure what is and isn't relevant.
Following some advice I found in this forum I got out my old OS disks to boot from the disc instead of the hard drive. I intended to archive the old hard drive and install my latest OS (10.4.6 on the disc, 10.4.11 was the version I had been running on the machine, I believe). The machine told me it needed 4.5 Gb to install 10.4.6 Tiger, but I only had 4.0 Gb left on the hard drive. So instead, I archived and installed with the OS that came with the computer originally, 10.3.4.
I got things going, did the archive and install, and got to the log in screen. Unfortunately, I could not remember the password, so I booted up in single user mode, and entered the following to get into the machine:
1. mount -uw /
2. rm /var/db/.AppleSetupDone
3. shutdown -h now
This got me in with a new admin login, and I started up in 10.3.4. I soon noticed that I could still see all of the files that I put on the hard drive on my old operating system. I thought I shouldn't be able to see them, but since I could I decided to try to copy them to an external hard drive. When I did, I got an error message saying that there was a read/write error. I was not entirely surprised, but I decided it was time to turn back to the forums for help.
What I want to do is copy everything from my old hard drive onto an external hard drive, make room on the iBook hard drive to reinstall my latest operating system (10.4.6). Once I've done that I'd like to get the essential files back onto the iBook from the external hard drive and continue using my computer (even though it is a dinosaur).
I have had my MacBook for almost two years and the battery had just died on me. So I sent it back to Apple and got a new one. But ever since switching over to this new battery, my computer has had issues starting up. A grey screen fades into white and the Apple logo never appears. The computer will just stay like that for hours. A friend suggested turning the power off and back on, holding apple+ctrl+P+R, which worked.However, the next time I turned my computer on, the screen stayed white again, without an Apple logo. Can you tell me what the deal is? Should I bother reporting this to Apple? Is this permanent damage I'm going to have to go thru everytime I start me laptop?
View 1 Replies View RelatedOSX 10.4.11 (Tiger) PPC G4 733 MHz
My Tiger volume gets stuck when starting up, it doesn't get further then the grey screen with the Apple logo. The clock with stripes keeps working but it doesn't get me to the blue screen.
For compatibility reasons concerning different softwares i use (Protools, Reason etc...) i keep changing the internal HD's for years now, thus changing the OS's (10.3.9, 10.4.11 etc). Never caused any problem.
When i boot from another 'master' volume (f.e. 10.3.9) OR from the OSX install CD, putting the Tiger volume as 'slave', in order to verify its disk permissions or the disk itself to be able to repair them, it's 'invisible', not 'seen' by the other volume.
So no 'verify disk permissions' nor Combo Update possible, maybe those things could solve my problem.
My cables are working perfectly: making the exact same connections and jumper settings with all my other volumes, is no problem at all: every volume is correctly seen by the others.
Also, there is no USB or external firewire device connected while trying to start up.
Remark: never had any problem with this Tiger volume, starting problem only occured yesterday AFTER installing Toast Titanium (which worked normally), shutting down and trying to start up again.
Nevertheless, some minor problems occured beforehand these last days: some apps didn't work anymore, like Safari, itunes, installer and UnrarX. But i don't know if it's linked.
My power mac g5 has suddenly started to shut itself down in the early stages of boot up. The apple logo appears and the spinning timer logo spins befor a complete shut down.
I have used my o/s disc to access the disk utility. Repair disc is not an option. Verify disc is an option but this process fails due to " invalid nodes"
Info:
iPad 2, Mac OS X (10.5.8), G5 PPC 1.8ghz, iPhone4
My Macbook with 4 gb RAM won't boot standard, safe, or Recovery.. All three results in grey screen with apple logo and spinning wheel which freezes after a few minutes. It also won't boot a bootable Mavericks usb with install package. I can boot single user mode and also view whats going on in verbose.. I am including a photo of where the script stops. PS: I've already tried resetting PRAM and the SMC has been reset as well.
Info:
MacBook Pro, OS X Mavericks (10.9.3)
I have a MacBook Pro from 2010 I believe with iOS Maverick installed. (MacKeeper is also on there, which I just found out is apparently malware)
So three days ago I was watching Netflix, the image froze, but the audio kept going. Figured my internet was slow, so I waited a little, nothing happened. pressed escape to leave the full screen mode, but nothing happened. None of the keys would do anything, not even the sound or brightness keys. So I did a force shut down by holding down the power button.
I waited a little, then decided to turn it back on. Start up sound played, white screen with grey apple logo and loading gear appeared together with a grey loading bar. I figured that this meant it had to repair something. But after about a minute or two it just went to a black screen/ shut down. I left it off for a day, tried it again, same thing. Next day I tried booting it up while holding the shift key to do the safe boot (I knew it wouldn't work since I already had the grey loading bar anyways), same thing happened.
I have a Macbook Pro 13 from the summer of 2009. After Christmas I decided to upgrade my hard drive and memory. This is what I got. [URL] For about a week everything seemed to work perfectly. I then began to have problems almost every day (finder crashing, etc). I reinstalled OSX probably 5 times using my previous account until finally did a clean wipe and reinstalled OSX again. It now seems to be working for the most part, but booting takes about two minutes. It gets stuck on the grey screen with the Apple logo with the turning gear for a couple of minutes before it boots. Normally it wouldn't bother me too much, but after the problems I was having before, I really wanted to make sure that there was no problem with my new hard drive or memory. After doing the usual suggestions for slow boot time (resetting PRAM, disconnecting external devices, repairing disk permissions, etc.) nothing changed. I booted into verbose mode and it seems to hang up for awhile before listing
disk0s2 i/o error
It does this twice before booting, hanging up for about a minute before giving the error. I am not sure if i should return it under warranty because I am not sure its broken. Like I said, it seems perfectly fine right now with the exception of the boot time. Using the Apple Hardware Check, even the extended check, didn't give any errors. The SMART status for the hard drive is verified. Is this clearly a hard drive issue, or could it be something else? Has anyone else had a similar problem?
Disk Utility in OS X gave me a Invalid key length after checking Catalog file, so I restarted to OS X Install DVD. It did the same thing on the OS X Install DVD. I went to Startup Disk, changed it back to the Mac OS X on Macintosh HD option - so I could go in and back my stuff up. It just goes to apple logo, does the spin thing at the bottom, and goes black. I can't even boot from DVD anymore.
View 1 Replies View RelatedMy computer starts up with grey screen,apple logo, rotating cirlce, and then it shuts off. Is there anything i could do before i take it to the apple store for help?
Info:
MacBook
My mother's unibody white MacBook will not get past the grey apple and spinning gear when you first boot up the computer. This was after she opened a link in an email from a friend who had her email compromised. Now I'm getting spam emails with the same link from my mother's hacked email, and her computer won't even get to the login screen. I took it to the genius bar only to be told it was likely HD failure, but the windows partition works without a hitch! What could this be? A trojan? Is there any way to retrieve data (really just pictures) before I attempt to reinstall OS X?
Info:
MacBook, Mac OS X (10.6.8)
My 3 month old macbook pro suddenly has problems booting up. I press power and it goes to the gray screen with the apple logo, the gears start spinning, and then it just shuts off!
Info:
MacBook Pro, Mac OS X (10.7.5)
having problems with my MacBook Pro. Turns on, straight into user log in. Once password is entered it tries to start up then eventually after grey progress bar has finished brings up a grey screen, then shuts down again.
I've tried starting in safe mode and resetting PRAM etc with no success.
Info:
MacBook Pro, Mac OS X (10.7.2)
I purchased a new late 2013 27 inch iMac 3.4Ghz i5. The only thing I did after pulling it out of the box was restore Time Machine from my previous iMac. On startup the machine boots as expected, but gets interrupted by the screen turning a dark blue, and the apple logo turning bright red, for about a second or so, then boots as normal, and opens Mavericks. I've spoken to Applecare - they suggested I re-install Mavericks, which I did. The problem is still there. I've done a hardware diagnostics test - no problems. Though I wonder if it could be a faulty graphics card? As far as I'm aware there are no other issues with the iMac. The machine is under warranty but would love to solve this if possible.
View 1 Replies View RelatedPretty smooth sailing until I had to reboot my mac pro. It just stops at the point where you have the grey Apple logo and the spinner.
I have a macbook intel core duo and it shut down in the middle of watching a youtube video. It will not startup freezes at grey screen with apple logo (no spinning disc). There are no abnormal sounds or extreme temperatures. The macbook is just over one year old.I have tried the following:Ran disk warrior 4 in target disc mode - no problems found
View 10 Replies View RelatedMy ibook g4 when starting up stays on the grey logo screen with the loading circle , but won't do anything further I left it on for two days straight to see if it needed time to load but still nothing ... What do I do !?
Info:
iBook
My computer died last night with each application not responding. I couldn't shut down normally so I held the power button to turn it off.
Next morning, I tried to boot the MacBook Pro and the boot process stalled at the grey screen with the Apple Logo and spinning wheel. I let it go for an hour and there was no change on the screen. Based on Apple's desk I ran Hardware diagnostics (extended with looping disabled) and got the following error
4HDD/11/40000000: SATA (0,0)
The screen shot is below
I ran this again with standard testing (no looping) and standard with looping and all gave the same results.
Info:
MacBook Pro with Retina display, OS X Mountain Lion (10.8.2)