Have just got an iMac and am running boot camp - XP Pro. I've turned down the brightness with the boot camp software controller, but the screen is way too bright still. Any other way in XP/boot camp to turn the thing down more (other than sunglasses)? I've googled sans luck.
View 7 RepliesI use VMware Fusion to boot my boot camp partition as a VM but I can't figure out a way to export that "VM" into VM image files that I can then move off to another OS X machine and load it up.
I want to rebuild my Mac Pro and would like to first move my boot camp Win7 VM to a proper Vmware file(s), copy on over to my Mac Book Pro and then blow away my Mac Pro and do a clean install without having the boot camp partition even in place.
I'm not attached to VMware Fusion either and wouldn't mind having the option of importing this boot camp VM into Virtual Box also.
In retrospect, I should have ignored it when Apple Software Update told me about the Boot Camp 3.2 upgrade for my 2006 Mac Pro running x64 Win 7 ultimate. When I ran it, it overwrote my blue tooth driver and my keyboard stopped working. Thanks for the folks at Mac Rumors forums, I was able to go through the procedure to get it working again, and I also had to update the video driver (again) from ATI for my 3800.
So then I decide to reboot into MacOS and discover that my icon for selecting the boot disk was gone, not to mention any directory or programs in the start menu. This happen to anyone else? Do I have to downgrade to 3.1 or does anyone have a recommendation to get 3.2 working?
I think it worked at one point, but sometime around the point when I set up Fusion with the partition, Windows Aero turned off and is no longer an option in the display settings. I installed this driver with the modded INF to see if it would do anything, but Aero is still not an option. I also have issues playing some games in Fusion, while they work fine in Boot Camp.
View 7 Replies View Relatedi am new to these forums, i have recently purchaced a imac and i previously installed parralells on it which worked fine other than the fact i could not play games on it. I was told to install bootcamp to overcome this issue, however when i downloaded bootcamp and proceeded with the install at the windows stage of the process (the dos looking blue screen where you choose the partition) the partition bootcamp created for me did not show up, therefore i cancelled the windows setup but when the computer re booted it is stuck on a grey screen like when you turn it on, you cannot boot from the OS X cd's which came with the computer you cannot log in on safemode you pretty much can't do anything. I have backed up all important things prior to doing this but how would you format the computer if its not responding to the command to boot from the CD?
View 9 Replies View RelatedWhere is the boot camp update that was promised by Apple before the end of the year? I know its not even Christmas but they are sure cutting it close, I can't wait to finally install Windows 7 on my new iMac.
View 6 Replies View RelatedI recently upgraded my Imac Harddrive from a standard 320 GB to a 1.5 TB Segate Barracuda 7200 Rpm 3GBS. Previously I had a boot camp partition for windows 7 ultimate. When I put in the new harddrive I decided to start fresh and do clean installs. Now when I try and install Windows 7 it goes fine until the last restart (4 total including initial restart). Then it just gets stuck at the screen where it says "Push any Key to Boot from CD or DVD". It will stay like that for a few seconds then the disk will stop spinning. So my question is now what do I do? I have to have windows for work purposes and this is driving me insane.
View 19 Replies View RelatedI'm having a problem with my new intel iMac, 2.8GHz. Whenever I play games in XP through Boot Camp, especially Sim City 4, my mac crashes with the audio looping over and over. I have to hold the power button to restart my mac. I've been searching for solutions, but haven't found any definitive answers. I recently updated the Realtek Audio drivers, but that didn't help. Could there be heat issues when playing games on the windows side that causes this?
View 6 Replies View RelatedI've googled this and looked here, and while there are many similar stories none are exactly the same as mine so I thought I'd post here. So, I was going to install the Windows 7 RC on a 2006 iMac intel Core Duo, which has a dead optical drive, so I was planning on using an external like I do for everything on this machine. After the restart to install Windows, I got a folder with a question mark, and figured that the iMac couldn't do the installation from an external drive but since it was looking for a disk got confused. I then hit the power button thinking that I'd just boot back into OS X until I found a solution, but when I hit the power again I got not even an inquisitive folder. Just a grey screen. I tried key combinations but nothing even seemed to get recognized. For example, the PRAM re-set combination did not get to a second chime, just the one chime and the grey screen. Command C did make the external drive spin (with an OS X disk in it) but nothing other then that. And Command D with the original install disk in did spin as well, but I got no further then that chime and grey screen I got every time. I don't expect miracles of course, and I want to know how to fix this. This machine is out of warrantee, and if it needs an actual hardware repair I'd rather find out what it needs and do it myself then have someone else do it. I know I can, and it is cheaper that way. And of course if there is a simple software fix I'd much prefer that.
View 4 Replies View RelatedJust about to buy a Imac 27 i7 with the SDD and 2TB, where I also will run Windows 7 (64bit). Is it ok to make to partitions on the SDD for MAC OS and Win7? Never had a SDD HD before, so just want to be sure to partitions works as always here.
View 3 Replies View RelatedI want to replace the hard drive in my iMac (2009 i5 model) but I'm not sure how I can copy my Boot Camp partition over. I had a difficult time trying to installing Windows 7 on my computer the first time I did it, I had to slip in extra drivers and remove ram sticks and stuff like that but once I got it running it has ran fine without any problems. I skimmed through the SSD upgrade thread looking for info but I didn't see anything that jumped out at me. When I google'd the issue, almost all of the info I found was from 2009 and older. So, what is the best way to copy a Boot Camp partition to a new hard disk?
View 2 Replies View RelatedApple's default audio drivers (for Windows) for the built-in speakers on the iMac make them sound horrible, they have way too much bass, whereas in OS X they sound great. Why is this?
View 4 Replies View RelatedI own every piece of software and hardware from Apple there is and I cannot understand that it seems that everything is about the iPad and iPhone right now. I have been having these issues since I got my 27" iMac. I can install Windows 7 just fine on my MacBook Pro and my previous 24" iMac.
Ever since I got the 27" iMac I get a black screen when installing Windows. I have found some posts that have a way around it, which seemed to have worked but now I am getting the blue screen of death. Doesn't matter if Windows 7 is supported by Apple or not but Boot Camp is and it should be corrected.
There is no excuse that after 6 months this issue has still to be addressed, all Apple talks about now is iPad and iPhone, I am sick of it.
BTW I own an iPad and I don't see the big fuss about it, I bought it mainly to read books and watch Netflix on the go.
I have a 20'' iMac with a 2.4GHz Core 2 and an HD2600XT.
There are light vertical wavy floating lines visible on the screen when running Windows XP. They are more clearly seen when you look the screen at an angle, from down below you look upwards to the screen. The floating lines can be precisely seen on grey backgrounds. These lines are not noticable much, but when you closely look with grey backgrounds, they are visible.
The problem is very strange because I've tried updating the drivers to my HD2600XT, and no luck at all.
I'm not able to determine wether the problem is hardware of software related, due to the problem not existing in Mac OS X.
I launched the Boot Camp Assistant 2.0 on my iMac OS X v10.5. I was hoping to install Windows XP Professional with Built-in Service Pack 3. However, when I tried to partition the disk (32 GB on Windows), a message came up, saying "The disk cannot be partitioned because some files cannot be moved." It states some directions underneath, but, as I am new to Boot Camp and Mac, I don't know what to do and how to do. Please help!
View 8 Replies View RelatedThe new blue tooth key board does not work in windows 7 boot camp, Windows cant locate the divice... New iMac blue tooth key board does not work in windows 7 boot camp!
View 4 Replies View RelatedI had a 2008 24 inch imac (3.06ghz C2D) and had some issues with it. First the hard drive failed, upon bringing it into the Apple store, they told me that they replaced the hard drive and screen (due to dust under it), however, this was not the case. What they had actually done is replace the entire unit and gave me a refurb which was previously registered to someone else (as evidenced by the registration info). A few months later, I had another issue, this time the logic board had failed and I once again had to lug this 20 pound beast through the largest mall in the city in order to get it to the Apple store (for the second time). I politely explained my discontent with this whole process, they did not inform me that the unit was a refurb and now it had failed yet again. Much to my surprise they offered me a replacement in the form of the i5 with a 1tb drive, 4 gigs of ram, the works. Now here is the problem: I was not given any of the included dvds as they do a "like-for-like" swap only. This is now an issue because I can not install Snow Leopard from the retail dvd, nor can I install Leopard from my previous iMac disks. In addition to this, I do not have the correct drivers for a boot camp install. Thus I am stuck if I ever need to reinstall Snow Leopard or if I need to utilize boot camp (which I do).
View 12 Replies View RelatedBeing a history enthusiast of that era, I've been waiting for Empire: Total War to come out for quite a while. I'm also a bit of an enthusiast as well and would really like to get a new iMac. I'm just wondering if anyone out there is playing E:TW on an iMac with Boot Camp and how well it's been working. Any particular video card recommended over the others?
View 1 Replies View RelatedJust partitioned 150gb for bootcamp on my 1TB HDD. I installed XP Media Center OEM without a problem at all. I then put the snow leopard disk in and it autoexec'd and then looked like it was installing stuff. Then it went to screensaver and would not respond to keyboard or mouse input.
View 3 Replies View RelatedIs it possible to boot from an external Firewire DVD Drive? It certainly isnt from an external USB DVD. Real answers only please, not "I think so" ones based on HDDs or rumours you may have heard!...
Background:
I've got an MCE Optibay in my Mid-2010 i7 MBP. When installing Bootcamp it refuses to install from the external USB DVD drive. In the end I pulled the 2nd HDD out and reconnected the internal DVD. It then worked fine without a hitch. Then I reinstalled the 2nd HDD and all was fine for a few days.
Now I want to resize my Win7 partition (bigger, as MS Visual Studio's bigger than I thought, and I might stick some games on). I can shrink the OSX partition fine with Disk Utility, but windows won't grow the Win7 one because the empty space is before the Win7 partition, not after it. Apparently this can be done with GParted. Guess what? I can't boot the Linux based GParted CDROM from the external USB DVD drive! So, will a Firewire one work where USB fails, and solve my alternative OS booting issues? If I buy one I can then either use GParted, or delete the Win7 partition and start again without having to pull the laptop to bits all over again, only to put it back once I'm done, and possibly have the same issues in the future. Obviously I don't want to blow extra money getting a Firewire DVD drive though if it's a waste of money...
This is the 1st time i got a Mac , i bought a black Macbook 2.4GHz some days ago .
I installed Windows Vista Ultimate using Boot Camp , and all went smoothly .
Only 1 prob is when restarting , i have to wait too long for the Windows to log on , i think about 1min with the black screen.
And if i want to boot in Mac OS , i have to push down the D button or the Alt, it takes quite a long time too .
So do you guys have any solution to this problem ? I want to get rid of the waiting time, way too much.
And do you know how to make my Macbook jump right in the choosing section when it starts ? ( so that i dont have to push down any button when it starts )
Is there a way to make the Boot Camp menu the default boot screen, as opposed to holding Alt? This is the latest SL release, if that matters.
I know this is possible in some manner, our networked iMacs all do it; they start up and give the option to boot OS X or Windows, with a countdown to boot the default OS. I'd just like the same thing to happen on my MBP.
I just installed boot camp and windows on my new imac. Everything seems to be working great. I noticed, however, that on the mac keyboard there is not an "insert" button or a "num lock" button. Is there a link or manual to figure out which buttons I can use for the windows apps?
View 5 Replies View RelatedI have done some research on triple boot systems, and it appears that a third OS must be run virtually, but all the information I came across was a few years old. Microsoft is running a deal right now on Windows 7 for students so I would like to pick up a copy and try it out.
Is it possible to run 3 operating systems through Boot Camp 3.0? I am not interested in running a virtual OS.
Current Setup:
13" macbook pro
Snow Leopard and Windows XP through Boot Camp
I have been trying to install Windows 7 (yes, legit copy) to my Macbook Pro the whole day, but I keep on getting this error message saying "Press any key to boot from cd or dvd . . . ."
When I press any key on the keyboard, nothing happens. I know this copy works because I've tried this on VMWare 3. (I'm going to Boot Camp of BIOSHOCK!)
What I've Tried:
Deleted partition, recreate partition and choose the Windows 7 disk as startup disk.
Well I installed Vista Ultimate using boot camp on my 27 inch iMac using 10.6.2 and now I can't get it to boot in OSX. I tried holding the command key when rebooting but it just goes into the windows part. Looks like windows took over. Does anybody know how I can get it to boot in Leopard?
View 3 Replies View RelatedHave the new 15" MBP with i7 Processor. I had another MBP with a 7200RPM drive and installed drive in the new i7 Mac. Computer was working fine until I installed Windows via Boot Camp. I can't boot to the Mac Partition any more, the partition is there but when you try to boot to it you just see the Apple logo and NO circle. I cannot boot to the install CDs or a bootable external drive. I target disk mode the computer and used another computer to boot using the drive in the i7 unit and it's fine and I can see all the information. I tried booting the i7 into single user mode and saw the following message:
efiboot loaded from device: Acpi(PNP0A03,0)/Pci(1|1)/Ata(Primary,Master)/HD(Part 2,Sig********-****-****-****-************)
boot file path: SystemLibraryCoreServicesoot.efi
.Loading 'mach_kernel'...
................................................................................
I want to install XP using Boot Camp but when I run the Boot Camp Assistant I get the following message
Boot Camp Assistant can not be used
You must update your computer's Boot ROM firmware before using this setup assistant.
Now I have tried all firmware updates available on apple site but they say they are not needed, I'm on 10.5.6 and a friend of mine with same firmware runs his boot camp comfortably.
My Boot ROM Version:MB21.00A5.B07
SMC Version:1.17f0
I just installed Windows XP to a Boot Camp Partition on my MBP. However, rebooting is a hassle and naturally I want to avoid doing such as often as possible. I think running Parallels Desktop would suit my needs quite well. But here's the catch: I want to be able to use one partition to serve both of those needs. In other words I want have the option of booting through both Boot Camp or Parallels.
How would I go about doing this? I already have a XP installed via Boot Camp. So if there is a method where I don't have to reinstall, great, but I am fine with deleting stuff.
I'm using MacBook Pro 13" Late 2011 with 256gb SSD & OSX Lionafter I install boot camp + Windows 7 Professional when i restart to boot OSX it have blinking folder with question mark I've try using Option button to select drive but it have only internet recovery
Info:
MacBook
Pro, Mac OS X (10.7.4)
