Windows On Mac :: Finding A Second Partition That OS X Will Read
May 30, 2009
I have a White MacBook with a 120GB Drive, currently partitioned into 2, a 20.8GB ish Windows Vista Ultimate Partition, and a 90.9GB ish Mac OS X Leopard Partition. The problem is I've run out of space, and need a extra 5gb partition, that both OSes can read. I can shrink the Mac OS X partition with Disk Utility, and I can add a new FAT32 partition under Windows, problem is Mac OS X wont see it, or mount it, it just sees empty space.
1. Why is this?
2. How do I persuade it to read and mount the partition?
I have a research computer where I would like to dual boot windows 7 64 bit and OS X. I want a separate partition to keep all the data that both OS X and Windows can read. The trick is that I want to use a vmware fusion file in both that is bigger than 4gb so fat 32 won't work.
Been a Mac convert now for about a year and haven't really looked back. So far the only thing keeping me from going straight Mac is Quicken. Hopefully this spring Intuit will get the latest Quicken for Mac right, but I digress. I am currently running VM3 to boot into Windows 7 in order to use Quicken, and a few other things from time to time. But this new Modern Warfare 2 game kinda has me thinking I might need to install Windows 7 via Boot Camp in order to give it a try. With that said, if I install W7 via BC I'm I able to access the data on my Mac partition, and with full read/write access? Furthermore, do I understand correctly that VM will then allow me to access my BC install from within it, thereby having the best of both?
I am planning on using Boot Camp to install Windows XP on my MacBook. I was just wondering what the minimum size of a partition is? I am just going to be using it for watching my netflix movies because they are not supported in Mac OS X. =( Would 10GB be enough?
I need install windows 7 on my mac (for some windows only programs). I would like to create a partition via bootcamp to run Windows 7 on my mac. I would also like to use that same partition on Parallels 5.
I am looking for a way to LINK the bootcamp partition to Parallels 5 so I can use Windows 7 on parallels when I am need of "light" programs and just boot to Windows 7 when I need more intensive programs. I have NOT installed windows 7 via Bootcamp or Parallels yet.
I recently made a clone of my Windows XP Pro SP3 installation (its roughly about 14GB according to Finder/WinClone) so i made a 80GB partition on my 320GB drive and it gives me this error message:
the WinClone came from a 500GB internal drive and ive gotten winclone images to restore to a MBP before but not sure why its giving me this error code, anyway to restore the image to the new partition (which was created with Bootcamp) as i no longer have access to the old machine it was running on.
First some background info. I recently purchased a 1TB hard drive for my 13" MBP, and I am about to do a clean install of OSX 10.6 and Win7 64bit on separate partitions.
And I want to setup the partitions before I install using Disk Utility. The reason for this is because I'm under the assumption that when creating a NTFS partition its better for the disk to be blank so it can put the MFT(Master file table) and MFT Mirror wherever it wants instead of some random spot on the disk (that way disk writes will be faster). The MFT thing was true when converting a FAT32 disk to NTFS. Nativity formatted NTFS disks were always faster then ones converted from FAT32, because the MFT was spread out instead of at the start of the disk.
I'm worried that installing OSX and then using the bootcamp utility will cause the MFT on my NTFS partition to end up in a un-optimal place and disk Reads/Writes will be slower.
Ok, so here's my questions.
1.) Should I be using a GUID Partition Table or Master Boot Record(Remember OSX 10.6 and Win7)?
2.) Should I use Disk Utility to Create a the OSX partition and then leave the second partition as Free Space? / Or should I use a third party utility and make the OSX partition and the NTFS partition at the same time?
3.) If I do create the partitions Manualy, will bootcamp still work correctly?
4.) Should I Use Journaled or Case-Sensitive Journaled on my OSX partition?
I know all of the questions were stupid, but there isn't any info on the web about it.
So my iMac came with a 1TB hard drive and I installed Windows 7 x64 but only gave it some 93GB. I have a two-prong question:
Can I add a third partition to my drive after I partition for BootCamp? My main partition ("Macintosh HD" by default) is over 900GB large and I'd really like to cut that up into 2x450GB, for example, in addition to the 93GB BootCamp partition.
Second, once partitioned, is it possible to resize the BootCamp partition to make it bigger after it has been set up?
Got my first MacBook Pro about 2 months ago and I have been enjoying it to full effect, installing programs such as logic studio and photoshop cs5 on it. Recently, however, I decided that I would like to access some of my windows based programs when I am on the road and don't have my desktop pc with me. So I bought a fresh copy of 32-bit Windows 7 Ultimate and sat at my macbook, put the disc in and then loaded up Boot Camp. I went through the menu options, decided that I wanted a 50GB partition, leaving my Mac OS drive at 182 GB with 83GB to spare. However, when I started partitioning, after about a minute it stopped and this error message appeared: "The startup disk cannot be partitioned or restored to a single partition. The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows.".
I tried cleaning all my temporary files and deleting some files in my downloads that were quite large and I restarted my machine. The problem persisted. Is there a solution to this problem that does not involve doing all this rubbish with a fresh install of Mac OS? I don't have any method of backup apart from a couple of 4GB flash drives..
I recently installed MacDrive on my Windows Vista X64 partition so that I could access my iTunes Library on my Mac partition. After installing iTunes on my Windows partition and pressing shift while it opened, iTunes asked me for an iTunes library file ending with the extension ".itl". Now, I do not have any files ending with this extension in my iTunes folder on my Mac partition. Is there anything I can do to make iTunes on Windows to read my music library on my Mac partition?
I am dual booting XP Pro and OS X on my NC10. I have XP Pro installed on the main partition with a FAT32 partition for files that can be read by both OSes (see attached image for two views of the partitions). I then installed OS X on an extended partition. Unfortunately, I had another 5GB partition also on that extended partition. I now want to delete the spare 5GB partition and non-destructively reallocate the space for the OS X partition - I want to expand it to be one big partition with my bootable OS X install still on it. Unfortunately, I can't find any way to do this in Partition Magic. Is it possible with GParted/BootItNG/iPartition or any similar software? If so, which and how? The NC10 has no CD drive so solutions that work from OS X or XP or a bootable USB stick would be preferred.
I have a 13" MBP with a 250 gb hd, I partitioned the HD 25gb for Windows XP shortly after I bought it. I was unable to install my copy of windows, contacted apple after exhaustive search as to why... Long story short, I now have Vista to install... When I went back to Boot Camp Assistant; partition was gone. Researched... ran disk utility, repaired and erased partition. Bootcamp HD now shows up in desktop, still not in bootcamp assistant. Since I am unable to locate in assistant; would there be any problems with just installing Vista off the install disk by restarting? Any ideas what to do if this is not a good idea (short of restoring)?
Is it possible to sync one's OS X iTunes library across Boot Camp into Windows? I would like to have the same library on both my Windows and OS X partition, and by library I mean having the same ratings and play counts across both partitions in addition to the actual music. If this is possible, how can it be done?
I have a problem with downloading files on my OSX partition. When using firefox/opera/safari to download a file, I often get an error "the source file could not be read, please try again later or contact system administrator" (Firefox) the other browsers just stop.
I tried repairing disk and permission repair, but no luck. Does anyone of you guys experienced similar problem or know how I can fix this? please let me know.
I'm both elated and pissy at the same time. Something happened to my mac when I was traveling, be it a latent hardware flaw, damage, or some other random act, and my mac OSX partition just, well, died. Unbootable, disk utility spends over a day trying to fix the boot record. The Bootcamp windows partition is fritzy, but it at least mounts and periodically can be booted from. I bought an external usb hard drive, loaded SL onto that, and have my mac back up and running again, but no data to speak of. So based on numerous recommendations, I paid good money to purchase Disk Warrior 4. Nothing, just told me the Macintosh HD partition on the hard drive was damaged, but that bootcamp could still be read.
i have a macbook pro on which i've installed windows xp, i made the mac and windows partition equal which was a mistake thinking will use them as much as one another, but it turned out to be that I'm barely or never using my windows on my mac, and I'm running out of space very quickly. I need to know how to make the windows partition smaller and the mac partition larger. I need an answer quickly because i've only got 4 Gb's left on my mac partition and 40 Gb's left on the windows one.
just trying to get back into Windows 7 after installing it via Boot Camp. Only thing is that holding down the option key during restart does nothing, and although the partition in which Windows 7 is installed under shows up in finder, I am unable to view it in system preferences so that I can boot from it. Any advice?
I just purchased a new iMac (2.66 c2d & 4gb of ram), Parallels 4, and Windows XP. I would like to get great performance whenever I use Windows XP and would like to know which installation procedure would help accomplish that.
Would Parallels provide me with a better user experience by installing Windows directly via Parallels OR by having Parallels utilizing a Boot Camp Partition? Which is better and why? Also, how much memory should I allocate to Parallels/Windows XP?
i'm using macosx 10.6.4 and bootcamp assistant 3.1
now here is the problem my windows 7 is infected with virus (thats why windows suck big time) and i need to reformat my windows 7 and reinstall a new windows 7.
how am i supposed to do it? insert the installation disk and do like how we initially installed windows 7? just format the partition and reinstall again? i just want to make sure so i ask before doing anything.
or can i do this? i use winclone to restore? any1 have any idea? i'm new to all this i dont know how to do it. i have backup using winclone but how do i do it? do i still need to format then only use winclone?
I'm trying to install Windows 7 and can't get the boot camp assistant to partition my drive. The drive in question is 500GB with over 200GB free space. I want a Windows partition of 35-40GB.On first attempt I kept getting the cannot move files error when trying to partition. I read up on the error online, and most people suggested issues with parallels or needing to use idefrag. I had parallels on my machine at one point, but am not sure if there are any problem folders still hiding somewhere. Any tips on that part?I ran idefrag overnight last night. When I booted the machine up this morning, I launched it again to verify that the disk was defraged. Boot camp still doesn't want to play.
Does anyone know how can i install Vista home premium on my imac? ive been using boot camp to do all the steps but im stuck at where i should choose NTFS format partition had disk. Seems like mine is FAT32.
This is what ive done; 1.Open up bootcamp assistant 2.Partition, divide equally(116GB each) 3.Insert Vista disk and start installation 4.Install Vista and insert CD key 5.custom installation 6.Now this is where i stuck
I have 4 options, and i should choose the last one which says bootcamp 116gb, but i cant click it since it says the disk need to have NTFS format. How can i set so that i partiton it to NTFS?
So I am trying to open up my bootcamp partition (running windows 7) in VMWare and I get this error message: Cannot open the disk '/Users/brandonquirarte/Library/Application Support/VMware Fusion/Virtual Machines/Boot Camp/%2Fdev%2Fdisk0/Boot Camp partition.vmwarevm/Boot Camp partition.vmdk' or one of the snapshot disks it depends on. It was working just fine before the upgrade to Snow Leopard but I am not sure if that has anything to do with it. I had to reinstall Windows 7 after I tried installing the Bootcamp 3.0 drivers so that may be more of the issue. I didn't test to see if would work still when I upgraded to Snow Leopard.
Basically, I created a BC partition for my W7, however, I only gave it 32gigs of space (I only wanted to use it for gaming).However, now I want to install Autodesk 3D Studio Max 2010 on W7, however I don't have enough space on my BC partition to do that...I've researched enough to know that I will need to use one of the following programs:I've read up on all the programs and done some research on them. Ive noticed most people are having problems with all of these programs when trying to backup a W7 image whilst on Snow Leapord (Mac OS x 10.6, which I am running)I know that is the function of the 3 applications above... But to my knowledge... In theory - I should be able to just backup my W7 using a reliable backup program (Can someone recommend any?) and then delete the existing BootCamp partition, create a new one of 100gig and then just load up the backed up image for Windows 7...