So a friends girlfriend tossed, as in threw, her older ibook g4. You ask why? Well she was mad at it so she punched the screen and it cracked, so she gave it a quick toss because the screen cracked. So I get to be the one to try to salvage the harddrive. I have the ibook torn apart, my macbook, a macmini and an external usb IDE harddrive enclosure at my disposal.
So I tried to target it through my macbook by holding down T and booting up the ibook. Hard drive clicks and spins, but nothing mounts on my macbook. So I bought an external USB for the ibook harddrive. My macbook won't see it when connected. So does this mean a bad drive? Do the older drives have to be connected by firewire?
Does anyone know if the PB 15.4 Aluminum case is exchangeable with the Macbook Pro 15.4 case? I have a 1.6Ghz Powerbook which has a few dents in the front but I don't see any of these cases for sale on Ebay, but I do see Macbook Pro cases. It's really a nasty cosmetic issue I'd like to resolve and then sell it.
I've been using this case from Brenthaven. It's only $25 and fits the 11" MBA, protects it very well, has a shoulder strap as an extra option and has an outside pocket for charger, etc.
They now list it for an iPad but when I bought it it was under 11" PC cases. I guess they thought it would sell better listed as an iPad case rather than a netbook case. It uses their CORE system, so you could dsrop this from five feet without damaging your MBA. Good value for only $25.
I'm trying to find a review for the Incipio Feather MBP case...
they seem to be available on Amazon, there is even the occasional mention of it on here from a few months back, but there are no reviews anywhere! Have they only just been released? All I have seen is the picture of the supposed sag by the optical drive. Not good.
I am about to get a new 13" MBP. I cannot decide between a Timbuk2 messenger bag, a Crumpler messenger bag or either a Booq backpack or Booq Nerve case. Does anyone have any experience with any of these? I am looking for a case that has enough pockets to keep all of my stuff in along with space for some files and/or book.
I have a Powerbook G4, 15-inch, and I need a case for it. What I really want is one like this from Incase
Except that I need it to have handles. I could swear that at one time I saw a case by Incase at an Apple store that was just what I wanted but I was stupid and did not buy it and now cannot find it anywhere.
Basically I want as minimal of a case as possible - it need not store anything but the computer itself (such as power cords, etc.). Does anyone have any suggestions?
So recently I found a cheap powermac G5 on ebay and won the deal and all, but when the computer arrived it was horribly dented. It was packed with on piece of under a 1/2" Styrofoam. In the end I got a full refund for the computer and the seller just said that I could keep it if I want it. So I wanted the thing on my desk so I went ahead and bought another case for it. Now here's the question, has anyone done this or knows how to do this? I want to keep all of the internals inside for it not to become a month or so long project in my spare time. I am not sure on a tool that would let me get up into the edges. If you want to see some video of the unboxing of the case and at the end some footage of the dented one and how bad it is go here.
i know that this may sound very crazy. I am wondering if it is possible to take everything out of a powermac g4 computer and put it into a standard atx case. i am trying to make a huge data server and need a lot of drive bays. i found 2 that i am considering: coolermaster with 11 bays or lian li huge case one other thing- is it possible to use a regular power supply or is that propriatary? I think with all of the drives i am going to put in it, i am going to need a more power.
Putting a new DC In board into my iBook this afternoon, but I'm stuck on opening the bottom case. I've got all screws apart from the Hex screw in the middle of the case, which will not come out at all. Im using a T8 Screwdriver for it, the same one that got all the other hex screws out.
It came with a carrying case, but I want a little more protection, like a snap on case? My cousin has a MacBook Pro and has one. And I want one exactly like it! But I haven't been able to find a similar one for my PowerBook If you don't know what I'm talking about, look here: [URL:...]Something along those lines. I've been looking for one for awhile but I can't seem to find one.
I have an old-ass desktop PC that I wanted to upgrade (especially a gaming machine), so I was looking through a good case. However, I really LOVE the Mac Pro/ PowerMac G5 cases. The silver one with lots and lots of holes in front And then I saw some PowerMac G5's on sale at my local authorized mac reseller, for a very nice price. it got me thinking, I can buy that PM G5, take out the innings, put it to my old desk-top case to use at home (since it's dual 1.8ghz or something like that, which should be very powerful) and use that CASING of PowerMac to build my new computer. So here's my REAL question:
1. would that be a good idea? 2. Would all the components, ATX Motherboard, a nice graphic card that's big, (thinking of GTX 260 or ATI 4870) fit inside? And also, what's the built-in power supply at?
I'm curious if anyone has a fairly surefire method to remove scuffs and scratches from an iMac G5. I picked one up from a friend for $50 that needed new caps in the power supply (check) and was pretty roughed up cosmetically. Now I've decided to keep it as a kitchen/guest computer but would like to get rid of the scratching as much as possible.
I went through all the steps to change the optical drive on an old 500 MHz iBook G3, but am unable to attach the bottom case. The problem is the two long (20mm) screws near the back of the computer -- each apparently has to insert into something that looks like a gold-colored nut with serrated edges, like gears, otherwise the screws just rotate in place and don't "lock up." I'll attach a picture, but my only digital camera until I borrow one from a friend is my cell phone, so the pic won't be too good. The gold pieces fell out during the disassembly process and I can't figure out where they now go.
I finally pulled my old, very dead, Powermac Dual G4 MDD out of the closet. I like the case design so much that I would like to keep it around if possible. Only thing is I'm not sure what I can do with it. Plant pot, aquarium, lamp, etc. Any ideas of what this thing can become in it's afterlife?
Yesterday I did something stupid and accidentally flattened my powerbook while it was open. This caused the casing around the left hand side of the monitor case to separate.
The part that frames the screen itself. Do you think the whole monitor is shot or will it just be an easy and relatively simple issue to fix. The screen works fine in fact I am using it right now, I just am afraid of dirt and don't like that it looks this way.
We have an old eMac but it works pretty well for our daughter's needs. We have a mysterious problem where the lower case 'r' won't work. I thought the keyboard was faulty and bought a new one but have the same problem with that so it's in the system somewhere. The uppercase R works.
Hi, I just acquired a PowerMac G4 500mhz that works great. However, the hinge is broken. It is on the right side (if you are sitting at the laptop). The screen casing is broken where the hinge is. There is nothing wrong with the screen, just the aluminum cases that covers it on the edges. I was able to remove the broken hinge from the computer. My problem is attaching a new hinge to the case without damaging anything.
i've been searching for a way to use an iMac G4's LCD Monitor as an external monitor for any other computer. So far i haven't found a solution for it, so during my search i read that it is possible to remove the LCD display from the iMac G4's case and install another LCD display that you know for sure it will work on any other computer. So, my question is, is this possible? if so, what LCD monitor would fit in the case? i know that there's a problem when trying to pass the wires through the arm, but i think i can handle that since i already tried with some random cables, so if you know of an LCD that could fit in the case.