OS X V10.7 Lion :: Configure Logitech Mouse Wheel To Cycle Through Desktops When In Mission Control?
Jun 5, 2012
When using the trackpad on my MacBook Air running OS X Lion v 10.7.3, I can easily access Misison Control with a three-finger swipe up, and then use the three-finger swipe left or right to view each of my individual desktops (while in mission control). I hope to gain similar functionality using the wheel button and wheel of my Logitech mouse (when I am at work and am using a keyboard and mouse).
I have downloaded the Logitech Control Center for Macintosh® OS X (available at [URL]) and configured Mission Control to load when I click on my wheel button. I currently have the wheel itself configured for vertical scrolling (e.g., for navigating web pages in Safari).
how I can specify a different role for the mouse wheel when in Mission Control - namely rotating wheel up will do the equivalent of the three-finnger swipe left, and rotating wheel donw will do the equvialent of three-finger swipe right?
Info:
MacBook Air, Mac OS X (10.7.3)
View 2 Replies
ADVERTISEMENT
Jun 25, 2012
So I was following some tutorials online about assigning desktops to shortcut keys, and I created 10 total desktops just so I can assign/play around with the keys. However, I cannot for the life of me figure out why I can't assign a shortcut to desktops 2, 3 and 4. I tried different key combinations and it does not work. I know that control + 5 works for desktop 5, so assigned that key command (temporarily, and I made sure that desktop 5 shortcut was different by changing it to shift+command+5) to desktops 2 3 & 4 and it still doesn't switch. Something is preventing these desktops from linking to a shortcut. Not even control+left arrow/right arrow works.
I also tried removing and re-adding the desktops with no success.
Info:
MacBook Pro, Mac OS X (10.7.2)
View 2 Replies
View Related
Apr 8, 2012
How do I get an app to stick in a desktop. I have the mission control desktop and then desktops 1 through 7. I have them all opening up various applicaitons, but even though I move the app to the desktop I want, and I shut down with the app open in that desktop, on restart it opens up in the wrong desktop...always the same one, but always the wrong one. iTunes - I put it in Desktop 7, its there when I shut down. It always opens up in Desktop 1. I don't have trouble with calendar, mail, addressbook. Also, sometimes 'finder' folders that I have left open in a specific window when I shut down do not open up on restart. They do sometimes, but most of the time not.
Info:
Mac Book Pro, Mac OS X (10.7)
View 1 Replies
View Related
May 21, 2012
Is there a way to delete empty desktops in Mission Control? There is a + to add them, what about removing ones you do not need?
View 6 Replies
View Related
Apr 15, 2012
Many times Mission Control will open when I make a fast movement up or down with Magic Mouse. It's happening more and more, and very annoying. ais there any way to turn it off? I can't figure out what iscausing it.
Info:
iMac, Mac OS X (10.7.3)
View 4 Replies
View Related
Jun 10, 2012
I just installed the new Deus Ex: Human Revolution from the App Store and I'd like to use the multiple mouse buttons my Logitech mouse has in my game. I can set up the controls to use various buttons in the game, but I also have the same mouse buttons set up in the System Preferences to be used for mouse shortcuts. The problem is, when I try to use the game, the "All Applications" or the "Show Desktop" shortcuts kick in instead of the games setup controls. How can I disable the Mouse Shortcuts for the system while I'm in the game?
Info:
iMac (27-inch Mid 2011), Mac OS X (10.7.4)
View 2 Replies
View Related
Dec 9, 2014
I just upgraded from 10.8 to 10.10.1. I have two monitors attached to my system. I have 4 desktops (2 monitors each) created in Mission Control.
I can no longer drag an application or folder window from one desktop to another. Had no problems in 10.8
Info:
Mac Pro, OS X Yosemite (10.10.1)
View 2 Replies
View Related
Feb 18, 2008
After 2 days of playing around with the new apple keyboard and mighty mouse, I thought, that's enough, and connected my logitech keyboard + mouse.
The keyboard is a big improvement, it has both windows and apple keys on it, and has a lot of extra features, like for example being able to press the 'print screen'. Even the mouse seems to work better, could ajust to the right clicking of the mighty mouse, sometimes it works, sometimes it didn't.
One think I'm still looking for is how to disable the display of widgets when you press the mouse wheel. I tried steermouse, it lets me configure the mouse wheel click as third button, but that doesn't change anything, I tried to run LCC (Logitech Control Center?) but it only showed me my keyboard.
I know how to change the keyboard shortcuts, but can't find the mouse shortcuts?...
View 2 Replies
View Related
Mar 21, 2007
I'm looking to maybe replace my mouse, and I quite like the look of the Logitech G3 mouse, mainly because it looks like the same design as my trusty Wheel Mouse, but with a couple of side buttons added. The problem is that according to the Logitech site, the software is PC only, but I assume that the standard left/right/middle buttons and scroll work as normal. I've read in another post here about the MX518 that although the extra buttons on that mouse can't be programmed in the control panel (except for expose?), they work fine in other applications (World of Warcraft was mentioned, and it's that I'm specifically interested in).
So, anyone actually used one of these mice? Or should I just get the MX518?
View 4 Replies
View Related
Sep 17, 2009
So I've got three Logitech mouses:
MX 510
MX 518
MX 1100 (wireless)
I used to own the Logitech S530 keyboard/mouse combo as well. What I've noticed is this (and it drives me insane). Both my 510 and 518 move perfectly, as in, its the same consistent movement, whether its fast motion or slow with the mouse. The MX 1100 has the same 'issue' as the S530; the control is god damn weird. Moving across the screen quickly feels like there's some kind of 'smoothing' (kind of like in some games where it would enable smooth mouse), and I just can't get used to pressing on onscreen buttons and such that require a bit more precision, because slowing down mouse movement gives me completely different control.
For example, if in photoshop and using the lasso tool to precisely cutout an object, it completely screws me up, because a slight jerk will send the mouse flying, there's no 'in between' it seems, and there's definitely no consistency. Both the 510 and 518 (gaming mouse!) have the same speed no matter what the situation. Is there any way to have any of the Logitech Wireless mouses behave the same as my other two? Or is this a technology issue with the internals? I keep going back to my wired mouses.
View 1 Replies
View Related
Mar 8, 2008
I've been using my Logitech MX1000 for a long time now with USB Overdrive and it's been fantastic. Being able to use the extra buttons to serve different purposes on a per-application basis has been amazing.
I just bought a Logitech Wave keyboard, which is great, but I ended up installing the Logitech Control Center since I couldn't find a way to configure the extra keys and I wanted volume controls, etc via the keyboard. The LCC software took care of this with flying colors, but it seems to also take control of my mouse and replaces the settings I had from USB Overdrive.
Basically what I'm asking is... is it possible to disable the mouse settings in LCC so it only sets up the key configurations on my keyboard? If not... is there some software available similar to USB Overdrive, but instead lets you configure all of the keys on your keyboard?
View 6 Replies
View Related
Oct 2, 2009
Ever since I downloaded the Control Center my mouse is screwed. When I scroll it goes REALLY REALLY slow, used to go fast. The only thing I changed is what the 2 buttons on the side do.
View 2 Replies
View Related
Mar 4, 2012
My favorite feature on the mac has always been the ability to see all open windows with a simple click (F3 on my keyboard). I often have multiple word documents and multiple pdf files open, as well as two or three different browser windows, several image files, and who knows what else. It is very common for me to have 10-20 open windows and it was always a huge help to be able to see them all at once, with filenames that would pop up when hovering with the mouse. This feature made it incredibly easy to move from file to file and truly see everything on the desktop at once.
As far as I can tell, this is no longer possible with Lion and Mission Control. Now if I have multiple windows open in a single application and enter Mission Control I see them tiled over one another, without filenames displayed for any. Sure, I can see all the applications I have open, but what good is that if I can't see which files I have? It's making it very difficult to work effectively-- basically I have to minimize each window one by one until I find the one I want.
Can anyone using Lion tell me how to see a graphic representation of ALL open windows, with filenames? Like I could in the good old days? Or is there something like a "see all open files" ability in Finder?
Info:
iMac (27-inch Late 2009), Mac OS X (10.7.3)
View 5 Replies
View Related
Apr 17, 2012
What worked for me to fix mission control lagging (after upgrading from SL) was to run the xbench graphics test a few times. That's it. It worked perfectly!
Info:
MacBook Pro, Mac OS X (10.7.3)
View 1 Replies
View Related
Apr 28, 2012
There's one thing I'm really missing from Snow Leopard in recent months which has been replaced by what I regard as Lion's inferior 'Mission Control'. How many times would you sit down, open up 20 or so Photoshop files and toggle between the F9 and F10 keys to present all 20 pictures instantly on the desktop using Expose. Mission Control doesn't perform nearly as well doing the same task.
Info:
iMac (21.5-inch Mid 2010), Mac OS X (10.7.3)
View 6 Replies
View Related
Jun 1, 2012
How do we change the background on the mission control screen? I don't want to download some wackadoo program. Apple is a visual company, and they know we would want to do this. There must be a way....
Info:
MacBook Pro, Mac OS X (10.7.4)
View 1 Replies
View Related
Jun 15, 2012
I open Mission Control up, have a few desktops and full-screen apps open. However, when I hover my cursor over a thumbnail, no 'X' appears. How do I close a thumbnail in Mission Control?
Info:
MacBook Air, Mac OS X (10.7.4)
View 2 Replies
View Related
Mar 24, 2012
I recently upgraded my iMac from Leopard to Lion.
At times, and this has been happening quite frequently, my screen automatically jumps to Mission Control mode. Sometimes, it comes back to Desktop mode by itself but at other times I have to click on the window to get back to Desktop mode. Its almost like the OS is playing games with me.
Just to clarify, I am not invoking the Mission Control program by either using the keyboard, mouse or from the Dock. The OS automatically switches to Mission Control mode.
Info:
iMac, Mac OS X (10.7.3)
View 2 Replies
View Related
Mar 28, 2012
I dont wont to have the dock in my workspace. Can I move the dock to mission control an launch apps from there?
Info:Mac OS X (10.7.3)
View 7 Replies
View Related
Apr 10, 2012
I meet a problem in using Mission Control and Launchpad. My system is Mac OS X 10.7.3, and my laptop is MacBook Pro mid in 2010 15". When I open it, use Misson Control it will display like this: Could not add space and no dashboard on the top of the screen. I really don't know the reason why. But if I sign off my account, the mission control will be normal again. And when Mission Control has this problem. The launchpad isn't also normal. Launchpad's background will be transparent. But this problem will come again after some times of restart. It randomly appears.
Info:
MacBook
Pro, Mac OS X (10.7.3)
View 8 Replies
View Related
Apr 29, 2012
I'm currently studying for the GRE, and here's my current setup.
Desktop #1: general computing
Desktop #2: vocabulary
Desktop #3: verbal
Desktop #4: math
Annoyances
1) I'll have a Chrome window open on #2 at a website to help me study vocabulary. However, when I'm at #1 and I click the Chrome icon in the dock to open a new browser to check email, it automatically takes me to desktop #2. While I can just check my email at #2, I want to keep that desktop exclusively for studying vocabulary. Is there any way to make MC treat each desktop as a separate desktop and NOT jump between desktops?
2) This seems to be a MS Office specific annoyance. I'll have a excel document open on #1 and #2. When I close the excel document on #1, MC automatically takes me to the document in #2, when I just wanted to close the #1 document and stay in #1.
3) A different scenario of the previous annoyance. There's an excel document open in #2 and I'm currently in #1. When I open an excel document MC...
- takes me to the ALREADY opened document in #2
- opens the document I wanted, but places it in #1
so that I'm in the wrong space AND not even looking at the document I just opened.
View 3 Replies
View Related
May 26, 2012
Mission Control [rocket] is missing from the dock?how to put it back?
View 1 Replies
View Related
Jun 23, 2012
I'm not sure how this has happened, but my Mission Control has become mirrored from the default settings. The "X" that appears to close programs now shows up on the left hand side of each Desktop, and the pop-out desktop that I am supposed to click on to create a new desktop is now showing up on the left hand side of my screen instead of the right hand side of my screen. Is there a way to restore Mission Control to it's default settings and configuration?
Info:MacBook Air, Mac OS X (10.7.4)
View 5 Replies
View Related
Apr 30, 2012
I want to be able to disable Mission Control for client computers. We are a school with a 1:1 computer setup and it is too easy for the kids to swipe their desktop away when a teacher walks by. I know I could manually disable the gesture, but I can't disable to my knowledge by permissions and I would rather disable the whole thing all together.
Info:
Mac OS X (10.7.3)
View 1 Replies
View Related
Jan 16, 2010
I have 2 MBP's, a Mac Pro, and a Mac Mini. On all of these I use a Logitech Trackman Wheel with. I updated the first 3 machines to Snow Leopard and the Logitech Trackman Wheel continued to work fine. I then upgraded the last MBP to Snow Leopard. For some reason the scroll wheel no longer works on the Logitech Trackman Wheel. I am able to use the ball to move around the screen, the buttons still work, but the scroll wheel won't work.
View 2 Replies
View Related
Feb 21, 2012
I've assigned Excel 2011 to a specific desktop in Mission Control. Upon launch, it opens in the assigned desktop, but if I'm on another desktop at the time I launch it, the blank spreadsheet opens on that desktop and not the one assigned to Excel. I know it launches on the assigned desktop because it switches to that desktop momentarily, but then switches back to my current desktop to open the blank spreadsheet.
If I open an excel spreadsheet while on the Excel desktop, it opens there and stays there, but if I click on the Excel icon in the dock to open a new spreadsheet while on another desktop, the spreadsheet opens on that desktop and not on the desktop assigned to Excel.
Most of the apps I've assigned to desktops in Mission Control work fine, but Excel and Word don't follow the rules.
Info:
MacBook Pro, Mac OS X (10.7.3)
View 1 Replies
View Related
Apr 10, 2012
System:
OS/X 10.7.3, Mac Pro.
I assume it is caused by the last OS/X update.
Problem:
I have 8 Virtual screens and usually use one for mail, filer, and one for browser and so on. With Mission Control I used to get all the screens in the top and the collection of windows of the current screen.
Now I only get the windows of the current screen. I still can switch to the first 4 screens (Ctrl 1 ... 4 ) But not further :-(I use CMD TAB to switch now.
Info:
Mac Pro (Early 2009), Mac OS X (10.7.3), 16GB RAM,
View 1 Replies
View Related
Dec 3, 2014
how to open mission control using magic trackpad. I tried swapping three fingers up, but it did not work. Three fingers only highlights, it does not open any application.
Info:
MacBook Pro, OS X Yosemite (10.10.1)
View 2 Replies
View Related
Apr 20, 2012
Whenever I am in a full screen app like Preview and I activate mission control, the space I see is not of the full screen app(here, Preview). The tab(or the tiny representation of Spaces on the top) that is shown as selected,however, represents the full screen app.
Info:
MacBook Pro, Mac OS X (10.7.3)
View 10 Replies
View Related
Jun 3, 2014
Checking out the WWDC keynote, I realised that there was no sign at all of Mission Control in Yosemite. Since they took away Dashboard and put it in Notification Center, any clue on where it is or whether it's been terminated? Any of the developers who have used the Beta program can tell me?
Info:
Mac mini, OS X Mavericks (10.9.3), Late 2012
View 1 Replies
View Related
