OS X V10.7 Lion :: How To Disconnect All Users In Airport Utility
Mar 12, 2012
In AirPort Utility I have just noticed (possibly since doing the OS X update to 10.7.3, early March 2012) that there is no longer a button to 'Disconnect All Users" from a Time Capsule disk. I used to:Open Airport UtilityClick Manual SetupClick the Disks iconClick the button that says Disconnect All Users However, the AirPort Utility interface is now different. Anyone know how to disconnect all users from a Time Capsule?
Info:
MacBook
Pro, Mac OS X (10.7.3)
View 4 Replies
ADVERTISEMENT
Jun 15, 2012
The latest upgrade of AIrport Utility doesn't support my Airport extreme, but the old version 5.6.1 says it doesn't work in Lion. How was I managing my Airport before th 6 update? What do I do now? Will I have to get a new Airport?
I have DSL service. I have an iPod Touch and an iPad 1 that I'm trying to connect. I just upgraded both iDevices to iOS5. I've been having trouble keeping an internet connection live for them, but now I can't even get the wi-fi to connect.
Info:
AirPort Extreme, Mac OS X (10.7.4)
View 4 Replies
View Related
Mar 13, 2012
AirPort Express doesn't show up in AirPort Utility 6.0. I haven't updated the AirPort utility on my laptop, and can find it there. 6.0 doesn't even has a scan button... I've done a hard reset of the AirPort Express, still isn't showing up.
View 2 Replies
View Related
May 14, 2012
I've repeatedly get: kernel: com.apple.message.domain: [URL].. I don't know for a fact what it means or what it's for but, after some research, the general consensus has made it quite clear that I need to upgrade Airport Utility to v7.5.2. The problem is that I can't seem to find it. This upgrade, apparently, was available well before Lion came out.
Currently, I has v6.0. If there is a known issue with Airport that promted newer versions to be released, then why can I not update to the latest version available?  a direct reply would be nice. Simply send me a message though Apple Support, if possible, or basic.woodworks@gmail.com, or simply reply on this forum and , I hope, I should get a notification.
Info:
iMac, Mac OS X (10.7.4), 17" iMac5,1;1TB;2GHz;4GB.667MhzDDR2
View 12 Replies
View Related
Mar 10, 2012
I then whantet to reconnect my Airport Express, witch i use for music in the living room.But i couldent for the life of me find out how to do that, so i thougt, ill just reset the thing, and set it up again.But this is where the problem starts.Every time i try to connect to the Express via the wifi list, the Airport Utility starts up fine, and starts the setup, but then crashes...!It dose this every time, at the same place, when it says "reading previous settings". Im running an iMac with lion 10.7.3 and Airport Utility is version 6.0.
[code]...
View 11 Replies
View Related
Jun 14, 2012
The recent software update has caused a problem. The update for Air Port Utility was corrupted and did not download. I have run software update several times since then and nothing has changed. How do I clear out the corrupted file so update can start over? (MBP Lion 10.7.4)
Info:
MacBook Pro, MacBook Air, iPad, iPod Touch
View 1 Replies
View Related
Jun 22, 2012
I've just taken receipt of a Linksys NSLU2 "Slug". It's essentially a small diskless NAS that allows you to plug in and share USB hard drives over the network. It passes its own POST, and is connected via a fully-functional Cat6 ethernet cable to an Airport Extreme Base Station 802.11n (hereafter simply, "AEBS") running firmware 7.6.1. In a nutshell: I can't make the Linksys NSLU2 (hereafter known as simply, "the slug") available over the network.Â
The problem appears to be this: the slug requires that the LAN use a subnet mask of 255.255.255.0. This is its default setting and, if it can be changed, I have to get it connected to the network first. The AEBS currently reports a subnet mask of 255.255.252.0. So far as I have been informed, it is this subnet mask mismatch between the slug and the AEBS that is preventing connectivity.I'm currently using Airport Utility 5, simply because I'm more accustomed to its settings. If I launch it, authenticate into Manual Setup, and navigate to Internet>TCP/IP, it displays the following information:Â
Actual problem:If I edit the Subnet Mask to 255.255.255.0, and click UPDATE, I get the following error message:The router address you have entered is not compatible with your WAN IP address
It then lets me change the Router Address before continuing. However, neither I nor my friend (whom I do believe knows more than a fair bit about networking) have any idea what this Router Address is. It is in no way similar to the router's Private IP Address assigned using DHCP ranges. It is a Public IP Address, and shares the first two octets with my IP Address. Because neither I nor my friend know what this represents, or what it is for, we're reluctant to mess with it. But until we "mess" with it, we can't change the subnet mask on the AEBS, and thus I can't access the slug!
Info:
Mac mini (Mid 2011), Mac OS X (10.7.4)
View 2 Replies
View Related
Mar 9, 2012
So, basically, ever since Lion, my external harddrive has had trouble being found while using the USB slot in the Airport Extreme. Anyway, so the HDD can be seen in the Airport Utility under Disks but I actually cannot access it through Finder. I have ticked the boxes to show External Harddrives in Finder and all that, so I am pretty connfused. All I use it for is watching movies off and TV shwos so I can save space on my MacBook Pro. So yeah, no Time Machine stuff which I usally see about this topic Â
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.7.3)
View 2 Replies
View Related
Jun 21, 2012
Using a MBP 15 with latest Lion and Airport utility versions. When I start up my computer, the utility loads each time which is annoying. I went down the menu choices on the utility but can't find a way to stop this.
Info:
MacBook Pro, Mac OS X (10.7.2)
View 1 Replies
View Related
Mar 22, 2012
I am currently am MBA student and must create projects using power point/ keynote, very often. Many of the power points/ keynotes created by students are informative but lack the ability to hold an audience’s attention (boring). Since I have this wonderful Macbook pro, I would like to create a dynamic keynote presentation which would include clips of audio and video files (I already know about converting keynote to power point). The only problem is, the videos I want to use in the keynote presentation are not able to be manipulated in iMovie (due to their format), and if they where able to be manipulated in iMovie, I’m not sure that PC users would be able to properly view them.
What video format (including embedded audio) is able to be viewed and heard by both OSX Lion users and Windows users?  If this is possible, can anyone suggest a safe application that I can purchase from the apple app store that will allow me to convert video files (including embedded audio) so that it can be viewed by both Lion and PC users? Preferably one that does not need access to the internet in order to convert the files ( I’m on the go allot and use an air card for internet access), but I will take it if this is the best option. If the app store does not have this type of application, is there a place that I can download a safe one?Â
Info:
MacBook Pro
View 7 Replies
View Related
Mar 14, 2009
This might seem an odd question but I had to replace my last Airport Extreme base station as it was faulty....I've now got the newer "Dual Band Extreme Base Station". I want to avoid any conflicts with my old settings for my wireless network with my MBP. Should I uninstall the last version of Airport Utility?Is there anything else anyone would recommend before i install or connect the new hardware/software?
View 2 Replies
View Related
Aug 9, 2010
When I am on my wireless network at home, I cannot print to my printer (via AirPort).When I go to the router and connect with ethernet cable, the AirPort magically detects itself in seconds.I have Windows 7 computers running bonjour and they can print just fine using AirPort.I was able to print fine wirelessly to the AirPort but today it's not working.
View 4 Replies
View Related
Sep 7, 2014
I have an old Airport Express (A1088).I am running OSX 10.9.4 - I have downloaded Airport Utility 5.6 and yet cannot install - I am getting "This version of Mac OS XÂ on this volume is not supported".Unfortunately no PC or old Mac available. I used to be able set up on IOS but cannot do that anymore either.Any clues how to re-setup this old airport that works ok.
Info:
MacBook Air (13-inch Mid 2012), OS X Mavericks (10.9.4)
View 2 Replies
View Related
Apr 18, 2010
After configuring wireless security on my Airport Extreme base station, the Airport Express I use to stream iTunes music to my whole-house stereo system has disappeared. Airport Utility can't see it. Yes, I checked connections. All I get is a blinking yellow light on the Express. The base station works as its supposed to.
I have a 17" Powerbook G4 with a 1.33 GHz Power PC processor. I'm running MacOS 10.5.8
View 9 Replies
View Related
Apr 21, 2009
I bought the new airport extreme to extend the wifi range in my household and hoped to share a hdd. Upon my experience and reading the forums, the sharing hdd is not as easy as I thought. But that is not my issue at the moment.
My issue is with extending the network. A couple weeks of ago, I did the setup to connect the two airport extremes together (older round AE & new box AE) using aiport utility. It seemed to have work because the signal was stronger in a part of the house that usually had 0 to 1 bar.
But shortly after, the signal showed itself as inconsistent. The signal strenght is jumpy from 0 to full bars. And right now, I am sitting in a part of the house that used to have 0 bars and now, I get full bars. And yet my mbp cannot see the newer, closer in distance AE.
View 5 Replies
View Related
Mar 15, 2010
Is there anyway to block users that are connected via cable ? aka restricting internet access, limiting the speed they get or completely locking them out without removing the cable ?
View 13 Replies
View Related
Nov 25, 2009
I am considering replacing my Linksys WRTY160N routed with a dual-band router and Airport Extreme in on the top of my list. If I connect an external harddrive to the USB port (or a NAS disk til ethernet) - will I be able to use it for time machine (or as a NAS disk in general)? Does the Airport Extreme allow the user to control all port, open and close what is needed and not? Is there a better choice for access point than this Airport Extreme?
View 1 Replies
View Related
Dec 22, 2009
I wanna boot people off of my airport express network, just as a little prank to my family.
I've searcher numerous times on google (including MR archives') and still no dice.
View 2 Replies
View Related
Jun 16, 2010
I have an external drive connected to my AirPort Extreme Base Station; the drive has 3 partitions, and we have multiple Macs in the house. Is there a way to specify which partitions are available to which Mac? For example, I'd like partition #1 to be available only to Mac #1, and so on.
View 2 Replies
View Related
Feb 10, 2012
I noticed that Time Machine backs up the system ever so often. What happens if I disconnect the external hard drive I'm using as the back up and Time Machine tries to initiate a back up? Will it corrupt anything?
Info:
MacBook, Mac OS X (10.6.7), 2.16 GHz Intel Core 2 Duo
View 2 Replies
View Related
Oct 21, 2010
I'm having trouble getting rid of unauthorized computers off my network. It has been password protected since the day I moved in and I cant figure out how these people are able to crack in.
View 24 Replies
View Related
Jul 6, 2012
Recently, I'm finding Airport Utility is launching itself. I log into my Mac Pro in the morning and Airport Utility is open. Â
Mac Pro Early 2008
Lion 10.7.4
Airport Utility v 6.0
View 6 Replies
View Related
Feb 12, 2009
I'm trying to keep track of wireless clients joining my network. The AirPort Utility "Logs and Statistics" button (under Advanced) allows me to see what DHCP leases are out and a list of wireless clients. But it's very annoying reading a long string of Hex to know which device it is!
Is there some way to assign a name or label to each MAC address within the Airport Utility? And Yes, I could use pen & paper, but what's the fun in that?
View 1 Replies
View Related
Dec 9, 2009
I used to own and airport express and it was cool with the feature of sending music to my speaker... but then It was time to upgrade...
so I get the Time capsule...
I opened airport utility and first it only recognize me the old airport express, I did a hard reset on the new time capsule and then it recognized me it but the old airport just disappear...
I have correctly configure the tc but the airport still doesn't show up ..
View 1 Replies
View Related
Feb 23, 2010
I love being in an all Apple environment, and typically works great and is intuitive. I do not miss Netgear or Linksys web setup pages and menus, but sometimes, like right now, I feel like either I'm missing something, or I need more control.
I'm using a (single radio) gigE Airport Extreme and I want to find the IP of a IP camera I'm trying to use (Trendnet TV-IP110). I realized that I can't see a list of the devices and their IPs (or even MAC Addresses) and also that I don't know how to assign static IPs (we presently have 4 laptops that are opened and closed all the time and they swap IPs pretty freely).
I've read here on MR some that static IPs are set for Macs in system preferences -> network but how do I do that for less intelligent devices? I guess I can set the IPs for all the household Macs one by one and then go through guessing to try to ping the camera.
Most of the time the camera's internet light blinks, but it went solid once, then blinked again some time later. I'm guessing it got it's own IP and went solid, then someone started using their laptop again and it lost it, but I'm not certain.
View 3 Replies
View Related
Dec 31, 2010
my airport express is in the other room so i can play my xbox360 online. but recently my express is flashing amber? and when i go to the airport utility i cant see my airport express.. so i just want to know how to get my airport express to get internet to it so i can plug and ethernet cord from my xbox360 to my airport express?
View 1 Replies
View Related
Apr 9, 2012
. My airport utility won't pick up my airport extreme on the scan even though it's currently connected to its wireless network. I turned my firewall off.
Info:
AirPort Extreme 802.11n (5th Gen), Mac OS X (10.6.8)
View 9 Replies
View Related
Jun 13, 2012
I have been try to update the Airpor Utility on My snow Leoprad server on a mac mini..I keep getting the following error 6/13/12 9:05:16 AMInstaller[71395]The outer edges of the subview frames are supposed to line up with the split view's bounds' edges. NSSplitView is working around the problem, perhaps at the cost of more redrawing. (This message is only logged once per NSSplitView.)then 6/13/12 9:05:51 AMInstaller [71395] The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.I have repaired permissions checked the Hard rive an d now am sort of lost..I am not losing sleep ovetr it as I have been moving away from teh airports express due to it streaming issues.. but still I guess its OCD when I want o keep the server up to date
Info:
Mac mini, Mac OS X (10.6.8), server
View 1 Replies
View Related
Dec 10, 2014
I needed to check on my network. When I opened Airport Utility, the only thing that loads is the internet icon, showing green. Neither my TC, or an older airport extreme on my network, are identified. Clicking on the drop down shows "no new wifi or airport devices found" .Â
Info:
MacBook Air, Mac OS X (10.4)
View 4 Replies
View Related
Jan 6, 2011
Software Update ran yesterday and I installed the AirPort Utility update (version 5.5.2), and now my MBP no longer connects to my home network when the SSID broadcast is disabled. When I enable the broadcast the network shows up in the list of available networks and I can connect to it, then I can disable it again and the MBP stays connected. But if it's disabled to begin with it won't connect.
I never had this problem before the update, and no other devices on the network are having any issues. Has anyone else had this problem yet, or know of a fix?
Late 2008 unibody Macbook Pro running 10.6.5, all software is up-to-date except for the latest update to iTunes.
View 2 Replies
View Related