I did: "Enter Time Machine Preferences" ---->"Options"----->"Exclude These Items from Backups"----->"Excluded Folder FOO". Today I go into TM, and there is folder FOO, backed up! WTF? Why is TM not respecting my exclusion of FOO from the backups?
View 2 Replies
I've been having a lot of trouble with Time Machine lately. I used to have a 300GB partition on a second drive dedicated to backups. Time machine is set up to backup just my user directory and the calculated backup size is 200gb. There are a couple of folders on my desktop that I also exclude. I've had it working this way for months now (before Snow Leopard came out). I started getting problems a few weeks ago. I formatted my Time Machine drive and got it to start a backup again, however, it kept running out of space without being able to complete the backup. I've been ignoring it since then because I knew I'd be getting some extra hard drives this week. After my new hard drive reshuffle, I now have a 500gb drive dedicated to Time Machine backups.
My backup size is still only 200gb but my initial backup would count up to 205gb/205gb or whatever it was and then keep going for hours with both the "done" and the "total amount" numbers gradually going up. It finally completed and I see that my 500gb drive only has about 30gb free or so. A bit of right clicking and get info clicking later and I soon find the root of the problem. The two large folders on my desktop that I've set to exclude have been backed up. I've tried killing the time machine settings file in the library and have rebuilt the exclusion list from scratch. I've also reformatted the backup drive several times. I've zeroed it once. Partitioned it into 16 partitions and wiped it again into one.
I am having issues buring CDs in Finder. Went to the Apple Store this past weekend as I have AppleCare. The genius there couldn't figure out the problem and only recommended I do a "Archive and install" of 10.6. Reluctantly, I did that today. Now I have lost most of my customizations to Finder, getting weird errors with some of my apps that load on login, and the problem still persists.
Instead of wasting hours on end getting the system up-to-date and trying to figure out all the errors Im getting, I decided to restore using Time Machine. I was about to restore a backup from yesterday (most up-to-date), but hesitated as I have never done a "Full" restore from TM before. So I decided to do a bit of research. From what I have been reading, the destination volume will be wiped clean and replaced by the backup. Normally this would be ok, but I remembered I excluded some folders from my Time Machine backup to cut down on space (Applications folder and VMs for example). I'm worried that if I restore using the "Restore from Backup" utility, I will lose the content in those folders.
Can anyone confirm what exactly will happen if I do a "Full Restore"? Will I lose those "excluded" folders? If so, is there any way I can restore only the System Folder for my backup (that's really the only thing I need to restore). I am slightly panicked and ready to go back to the Apple Store and rip that Genius a new one.
(Yes I know he couldn't have know about my specific backup setup, but he said that a "Archive and Install" would fix the problem. He also said that I wouldn't run into any issues afterwards, which was also false. Also, I know I am over-reacting but I have a valid reason to be peeved ATM)
I set up time machine to back up my computers hard drive and additionally to back up another external drive that is attached. however, it only is backing up one folder in my other external drive and nothing else.
Info:
Imac, Mac OS X (10.6.3)
I have a 10mth old MBP. I've been using time machine for just as long. However, I recently changed the external HD that I am using for my time machine backups. My MBP uses about 130GB of space. The folders that I am excluding take up about 50GB. This means I should only be backing up 80GB of info onto my external HD using Time Machine. Even under the Time Machine Preferences, the estimated space says ~80GB.
However, when I start the backup, initially it say 0MB of 69GB. And then when it reaches 69GB, the amount just increases. e.g. 72.3GB of 72.3GB. 79.25GB of 79.25GB. And it just keeps going till 80+ 90GB. For some reason, it is ignoring the excluded command. I've tried reformatting my external HD as well as disabling time machine and doing everything from scratch. But it still ignores my Excluded items.
The problem is that full Os backup should be about 155 GB, but it tries to backup whole disk 1 TB. It works fine for first full backup 155 GB (I have exclude list) after that it wants to backup whole disk no matter what. No such problem with 10.6.2 just with 10.6.3. Image so we are clear. I'm new to Mac OS X.
View 3 Replies View RelatedI've just started using time machine and actually surprised how well it works go apple. One question I want my time machine drive bootable just in case. Right now I am excluding the system library and user library cache folders from backup at the moment. Thats ok right? It doesn't affect boot ability or anything else serious right?
View 9 Replies View RelatedI'm having problems with Time Machine. First, I get the message that I need more space even though there is 1TB available on each and only 500GB on the boot disk being backed up. I've started fresh.
Second, both backup disks are shown on the "Exclude" list and are grayed out, so I can't take them off it. Nor can I add a disk I do want to exclude.
Info:
Mac Pro, OS X Mavericks (10.9.5), (early 2008), 22 GB RAM, 1 TB HD -- 500 GB free
I excluded for one TM backup a sparse bundle disk image that I have been backing up regularly. I then immediately removed the sparse bundle disk image from the TM exclusions list, and now TM wants to back up the entire sparse bundle disk image, which contains an iPhoto Library (80GB). It seems that TM does not "see" the previous disk image backups.
Info:
iMac, OS X Mountain Lion (10.8.5), 21.5-inch, Late 2009
I have tons of pics and music....so does time machine really back up ALL of it and keep the same quality???? I cant seem to retrieve or look at the files individually when Im browsing thru the time machine backup hard drive.
View 5 Replies View RelatedI needed some extra HD space, so I deleted the 1.5TB hard drive I've been using as my TM backup and thought I'd partition it and re-run TM in the partition.
I erased the drive and created two partitions: 1TB and 500GB. I transferred 250GB of files to the 500GB partition and then set-up the 1TB partition to be used as the TM backup. I ran TM and it told me that it had backed up 264GB...the problem is that my internal HD has 478GB of data on it...so...something's not being backed up.
My only thought at this point is to erase the HD again, re-partition it, and run TM first...and then transfer the data to the other partition.
I want to know when I can disconnect the external hard disc.
View 1 Replies View RelatedI have a Time Capsule as my Time Machine backup, which backs up my MBP and the external drive I use to hold all my files. The initial backup was roughly 400GB--325GB of which is iTunes related.
The initial backup--which I have done numerous times now--went fine. However, the next time I have the external drive connected, when Time Machine starts up to do its hourly incremental backup--it shows XXGB of 365GB ... so it is trying to re-backup my entire iTunes library. Anybody have this problem and find a solution?
I've been using time machine to back up to my WD hard drive but I am looking for a way that I can store photos and movies on my hard drive instead of leaving them on my laptop as well as backing up the whole laptop - when I back up with time machine if I then delete photos off my laptop can I simply pull them up from time machine at a later date and look at them from there?
View 5 Replies View RelatedTime Machine has been backing up insane amounts of data, and every time it's been backing up it's been going up, It's backing up at the moment and it's currently on 21GB. Not only that but when it finishes backing up it's been getting stuck on "Finishing Backup..." and the process coreservicesd has been using 90%+ of my CPU, causing my fans to go insane.
View 4 Replies View Relatedihad my time machine in only wifi mode for like the last month or so, then I redicided to use the backing up feature and all kinds of weird things started happening.
At first, it just gave the message "Backing up" for hours, and it would just keep at that message. (I know that at some point it can take hours to actually start the backup but it�s not this case here) Then like yesterday it started backing up but I turned down the computer as I thought it would be normal that my time capsule would work normally.
I unplugged it, and hited the reset switch several times, and nothing happened. It would not work. Am not a computer technician, I spend most of my time making music.
I have a Time Capsule and Time Machine on MacBook regularly backs up between 1MB and 5GB of data every hour, depending on how much data I change/delete/add to my hard drive. Over the last few days, it has tried to backup 150GB, 90GB, and 220GB, despite the fact that I'm not doing anything other than surfing the web and checking my email. The total amount of used hard drive space on my Mac is 330GB, so I suspect that Time Machine is running into a bug when it calculates what needs to be backed up. Worse yet, I see that the amount of free space on my Time Capsule hard drive is shooting up, meaning that somewhere on the disk, backups are getting deleted and I'm not being notified, even though "Notify after old backups are deleted" is checked off in the Time Machine preference pane in System Preferences.
View 2 Replies View RelatedSo my MBP has some funky display issues so I'm going to bring it to the Apple Store this weekend. Before I go I want to make sure everything is backed up on time machine incase they need to replace the whole unit or keep it for a few days to repair it. If they lost my data or had to give me a replacement one would I just be able to hook up my USB HDD and let Time Machine bring the new MBP back to it's old condition?
Would all of my program and settings be just as I left them? Bookmarks in Chrome?
Would all my iTunes purchases still exist as they do now?
Would I need to authorize iTunes again (using up another one of the five allowed.
I know this question was asked for a while, but I can't find the answer for 10.5.2. My point is, I wanted my iDisk to be backed up by Time Machine just as any other folder of my computer (by that, I mean backing up the local iDisk copy on the time machine HD, NOT backing up time machine on the iDisk). Until now, the only thing time machine did was copying the .sparsebundle of the iDisk any time a single file changed. Two drawbacks: a single change = 8Gb (for me) on time machine + restauration of a single 60k word file required to restore the entire disk image before extracting the right file.
This is why I stopped using iDisk. Now has someone by any chance a synced iDisk with 10.5.2 and tested backing up with time machine? I know some of you will answer iDisk is already a back up in itself. Sure, but there is no versioning every hour, plus I'd had synced issues that lead to losing on or two files (happened twice). This is why I won't use my iDisk until I can properly back it up/restore it in TM. BTW, I'm lazy to do the test myself, as re-activating the sync of my iDisk will take at least 2 hours to recreate the local copy on my MBP (hey Apple, remember you have EU customers?
i've been working on an important word document, word quit unexpectedly, document gone. luckily there was a copy of it in the microsoft user data.
but, my first reaction was, oh that's ok time machine would have backed it up. i go into time machine and it's not there. so i save the microsoft user data recovered file to a new file name in a documents folder. quit word. restart. do a time machine backup. it completes. but when i open up time machine, this document (and another one from 5 days ago) are not in ANY of the backups. and if i keep backing up, time machine will backup, but these files are not in any of the dates/times in time machine.
doesn't this defeat the purpose of time machine?
Time machine won't back up immediately when I plug in my drive, even if it's been a few days since it backed up last. It starts on its own eventually, but sometimes (like today) it waits almost a half-hour, even though it hasn't been backed up since December 3rd.
View 2 Replies View RelatedSo, I tried a search for this but didn't really find any details or threads.
I did a nice TM backup on a new MBP, came to about 40GB total, I excluded folders like my itunes library and desktop, where I store a bunch of installers and such.
after a week, I did it again, and it added about 1GB.
Then, after another week, just internet use, a BIT of email and such, I did another backup and it added 8GB to the total, to a total now of 49GB?
WHAT THE HECK was in the newest 8GB? Is that another new snapshot or something, since I CERTAINLY didn't add 8GB of stuff?
OS X 10.5.6. Time Machine won't back up a few of my files.
They're located at /Files/Truecrypt/
They are 50MB encrypted files created by Truecrypt. Time Machine is not set to exclude them.
I have noticed that my Time Machine-backups are quite big. 1+GB a day is not unheard of. How can I tell what data Time Machine is backing up, so I could determine where all that data is coming from? I don't download all that much stuff (no P2P for example), so I have no idea where it gets all that data to back up. Is there a tool I could use for this?
View 5 Replies View RelatedI just bought an external hard drive [LaCcie Grand 1TB]...and before using it says, the manual says create a back up in case you don't want you're information erased - cause, apparently, that what happens when you first apply a "partition" to you EHD. So, I decide to back up my data in my new EHD...with Time Machine, which I have never used before since I have had this MacBook Pro (2 years). Seems pretty straight forward. I turn on TM, start backing up. Everything seems to be going fine. I had ~75 GB on my main hard drive, and that seemed to have been backing up, until started reaching 75.1 GB...then 100.1 GB! So I stop it and I notice it has created a "inprogress" document in the EHD.
So I continue backing up, and still...it won't stop. It is like space(volume) keeps on expanding. So will TM just back up my whole hard drive? 250 GB? This how it looks like the third time I started the process [URL]. The "white" part just stays the same, while "17.76 GB of 17.76 GB" becomes "17.90 GB of 17.90 GB", "19.20 GB of 19.20 GB", "21.12 GB of 21.12 GB"...and so on. Is this normal? Should I keep it running till it stops? Am I doing the right thing by choosing my EHD as my back up disk? Even before "partitioning it"? Should I be safe if I transfer data manually to the EHD? before partitioning (is it optional)? Can I delete the "inprogress" document? I'm using a Mac OS X 10.5.8
I have an external HD (a partition of which was marked as my Time Machine disc) that had a bad power supply. I placed the drive in a new enclosure and it's working fine - with one exception. I don't get any errors in Time Machine, and it appears to be backing up (according to counter-clockwise spinning icon at the top), but when I open Time Machine there aren't any recent timeframes to restore from. As much as I can tell, the last update is from late January, which is when the power supply went bad on my external HD.
My external HD seems to be just fine - I can see, open, use and save data, but for some reason when I open Time Machine there are no recent saved points. Time Machine used to overwrite the oldest restore points, so I'd always have about two weeks of restore points to choose from. Now I just have two weeks from January, and it makes me nervous that my data is being backed up.
Am a Mac n00b here so just wana ask if i were to change the hdd and if i were to use time machine to backup the old hdd to my new hdd, would the bootcamp partition and all the files in windows be backed up too?
View 2 Replies View RelatedThe last time I connected my external drive that I use for time machine was in March. I just connected it and opened Time Machine. It only shows the last update it did. Its been connected for about 2 hours and it hasn't done anything. I can't find any start or backup now buttons.
View 3 Replies View RelatedI have a MBP, and every few days I back it up using time machine. For some reason it's been scanning hundreds of thousands of files and than it backs up tons of GB's. Like today it tried to back up 30 GB's but the last time I backed it up was 4 days ago, and I doubt I changed THAT much stuff on my laptop. Is this normal? If not, what can I do to fix it.
View 5 Replies View RelatedOn my macbook pro Time Machine has not backed up since March 18th.
If I got to system preferences I see
"Backing up: Zero KB of 70.80 GB"
It just sits there. Sometimes it gets as high as 442 bytes of 70.80 GB after hours of backup. Then I have have to move the notebook and start all over again.
Info:MacBookPro, Mac OS X (10.7.1)
