OS X :: Rename A Bluetooth Device?
Jun 20, 2009I have paired my iPhone to the Mac and it appears as 'Paul'
How can I change the name of the iPhone on my Mac to 'Paul Iphone'?
I have paired my iPhone to the Mac and it appears as 'Paul'
How can I change the name of the iPhone on my Mac to 'Paul Iphone'?
My bluetooth is off and it doesn't allow me to turn it on, what can I do?
Info:
MacBook Pro, Mac OS X (10.6.8)
I'm going to be getting a new phone very soon. I'm looking at the LG UX380 because it supports a 4GB memory card.
I don't really care about the music because I have many iPods to use.
That got me to thinking though - can I simply drag files to my phone from my iMac?
If that works, then maybe I could use Automator to set up a schedule to backup some of my more important stuff, then I can take it with me.
Just booted up a new 27" iMac and only have my Magic Mouse and wired keyboard connected. Went to the Bluetooth preferences and it shows "Apple Mouse" as connected. And then it shows another item 90-84-9j- etc. listed as not connected. The info about it reads as follows.
Type - Unknown
Services - None
Paired - Yes
Configured - Yes
Favorite - No
Connected - No
i was wondering if there is a device that works as a usb hub, but connects to the computer wirelessly via bluetooth to your mac. i think this would be nice since i will have a station where my macbook pro will go every night when i buy it and i would like to simply open it and have it connect to the monitor, printer, speakers, etc. without plug in in a bunch of cables.
View 5 Replies View RelatedToday my mouse ran out of batteries, so I went to get some new ones. I replaced them, the light on my mouse went on, and it seemed to be working. But, when I tried to move my clicker thing *on the computer* with my mouse, it didn't move. So, I looked at the bluetooth symbol on my computer, I'm on a MacBook, and it showed that my mouse wasn't connected. So I tried turning off the bluetooth, shutting off my mouse and turning it back on, taking out and putting the batteries back in the mouse, and none of these worked. So I went to "Browse Device" and my mouse was there, I clicked on it twice and it said "There was an error connecting to the device". I also deleted it from the bluetooth list, and I am now unable to get it back on the list!
View 1 Replies View RelatedI just bought an HP Photosmart C5580 printer without Bluetooth capabilities. Trying to connect it to my MacBook Pro OS X 10.5.6. When I try to set up the printer through the Bluetooth "Set up Bluetooth Device" function, I select "printer" under the list of options. Once I hit "continue", the Set Up Assistant automatically closes, and all that pops up is the Print & Fax System Preference Box. It lists the printer there, but won't allow me to do anything to actually connect the printer.
What should pop up is another box, asking me to select the printer. Under Bluetooth Preferences, it says that no devices are set up. However, it is clearly recognizing that the printer exists because when I look under "Browse Device" it is listed there. Yet it's clearly not connected since double clicking on the new listed printer only gives the message, "this device does not have the necessary services."
10.7.4 frequently freezes with the translucent dialog to power down then power up. This is not isolated to any particular application. Started with the upgrade to 10.7.4. Bluetooth device Bose Wireless Sound-link will not play either but does show connection.
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.4)
My Macbook Pro has been running into constant problems actually printing to any wireless device.
Info:
MacBook Pro, OS X Mavericks (10.9.3)
So how do I remove bluetooth devices from my bluetooth file transfer list? I have a few extra phones in there that I no longer use.
View 4 Replies View RelatedI have a bluetooth mouse and keyboard that I want to share between a PC and MBP via a DVI/USB KVM switch. I think I can do this by plugging a USB Bluetooth dongle into the KVM's USB input.
If I use the MBP's built-in bluetooth then when I switch from one computer to the other via the KVM, the keyboard and mouse will stay paired with the MBP; but if I disable the built-in hardware then the dongle can provide the bluetooth capability and be switched between the computers.
I've shied away from wireless keyboards in the past because I do alot of online baking and investment activities from my computer. I also love a clean workspace and a wireless keyboard could remove yet another wire from my desk. Do you consider wireless and/or bluetooth keyboards safe?
View 3 Replies View RelatedI've got a MacBook Pro 15" Early 2011 and I see unknown bluetooth devices under Bluetooth in System Preferences.
I never used Bluetooth on my MacBook but these devices appear.
Info:
MacBook Pro, Mac OS X (10.7.2)
I turned off the bluetooth function and my keyboard and mouse wont now work and I cant get back into the system - how do I reactivate without the use of the keyboard ?
Info:iMac, Mac OS X (10.7.3)
This isn't directly related to macbooks but if I want to use the bluetooth built into my computer to connect to my non bluetooth printer can I buy any USB bluetooth dongle to plug into the printer ( Kodak all in one 5300) or do I need some specific kind? All the ones I look at don't mention anything about printers just connection between computers and phones.
View 4 Replies View RelatedI have a new macbook pro, can I transmit music through bluetooth to a bluetooth receiver?
View 2 Replies View RelatedHey guys..>I'm trying to set up my jabra bt200 bluetooth headset to work with my mac (osx 10.4.2, 15" powerbook 1.67ghz)...and I can get it to pair, but it won't stay connected for more than a split second. this is a problem i've seen a few people have, looking around on various forums and stuff, and i was trying various solutions when i decided to try doing a firmware upgrade on the internal bluetooth module. I downloaded the firmware updater (1.2), tried to run it and it came up with the following error:
"This computer does not have an Apple Bluetooth module installed. It cannot be updated by this application."
Why would my Powerbook not have an Apple Bluetooth module?!?!?! It's got bluetooth installed, it's internal, but looking at the system profile, it says it's the manufacturer is Cambridge Silicon Radio. So is this normal or what? Is the firmware upgrade even going to help me out in the end? Just to clarify...the powerbook came with bt installed factory...it's not something added by me!
When I set up my Pro, I screwed up and hit the button before I realized I did not name my computer the name I wanted. Is there a way I can rename it?
View 3 Replies View Relatedhow can I rename my Mac HD to look like below?
View 4 Replies View RelatedI recently purchased a used 15" PowerBook Ti 1.0GHz with a fresh install of OSX 10.5.8.
Even though I am logged in as Administrator it will not allow me to rename folders or to delete some files. When trying to rename a folder, for example, it displays, " You do not have sufficient access privileges to rename the item."
I have run the Disk Utility to repair permissions but with no improvement.
When I Get Info on the folder, it says I have Read and Write permissions but I cannot change the name in the Get Info box, either.
This might sound like a stupid question, but is there a way to rename Preview??
View 23 Replies View RelatedThis is strange. All of a sudden I am unable to rename a Folder from untitled folder to anything. I can highlight it, but nothing happens when I try to type in a new title. I tried it on the Desktop and Finder. Any ideas? It would be prety hard to find anything if everything was in folders titled 'untitled'.
View 9 Replies View RelatedFor some reason my mac won't let me rename any of my files. It comes up with 'You do not have sufficient privileges to rename the item' every time I try. What's the deal?
View 13 Replies View RelatedHow do you rename files on a new alumabook? Right now I'm just playing my luck clicking on it different ways but I can't figure it out
View 5 Replies View RelatedExample: When i drag images or files from an email to my desktop such as photo.jpg that are all named the same, it always makes me replace the first photo.jpg or the second photo.jpg won't be put on my desktop. Is there a way to force it to rename the second photo.jpg to photo2.jpg or something so i don't have to decide to replace or only have one image?
View 2 Replies View RelatedTrying to rename a couple files in finder. Sometimes it works and sometimes it doesn't. I can click on the file to bring up the cursor, and the name gets highlighted. Once I start typing however, it just takes whatever I have typed and closes the cursor edit box and I have to start all over again.
It's like I have a 2 second window to rename a file. Even if I click and the cursor comes up, if I don't type anything and watch it the cursor disappears after 2-5 seconds.
I have Root - but can't seem to rename my home folder.
View 4 Replies View RelatedI am having problems with my user account, and I need to start fresh with a new account. My plan is to create a new user account and transfer my documents and images (but not my preferences) from my current account to that one. However, once I've migrated the data, I'd like to rename the new home folder with the same name as the old one to prevent any broken links from applications that will be looking for files in my old account.
View 1 Replies View RelatedI've noticed for a few months now both in 10.5 on my PowerMac and 10.6 on my MBP that often when I click to rename a file in the finder, it will a few seconds later "un-select" the renaming as if I had hit return to finish renaming the file. I then have to click it again to finish renaming the file. Sometimes, it will do this 2-3 times before it quits exiting on its own. I wonder if Spotlight could be interfering sometimes because it often seems to do it when the window is first open and OSX is in the middle of updating the little icons to show video snapshots and the like. But I've also seen it happen after they're all updated as well. I don't recall seeing this problem on either Mac more than say 6 months ago or so. It certainly never used to do it as I've had the MBP for over 2 years now and the PowerMac for around 4 years and I would have noticed. I wonder if one of the system updates might have changed something, for example.
Has anyone else noticed any issues with renaming files being unselected like that in the middle of typing?
How can I rename a .icc color profile in OS X
I used my Pantone Huey to calibrate bith my main display and my secondary (just switched primary display between the two machine)
Everything worked great but I have 2 profiles that have the exact same name.
I can open up the .icc and do a save as but that just changes the file name not the name displayed in sytem preferences