OS X :: Create New Backup - Time Machine Asks To Reuse Previous
May 28, 2010
I have two computers using one Time Machine Disk. The physical disk is connected to my Mac Mini, and it's shared over the network to my MacBook Air. The picture below is the backup disk in case you didn't guess. The notebook is my MacBook Air. So the MacBook Air backs up just fine, but every time my Mac Mini tries to back up, it pops up with "Would you like to reuse the backup "*DIRECTORY TO MACBOOK AIR'S BACKUP*" with this computer?" also shown in the picture below. So I click "Create new backup" and it seems to backup in the Mac Mini's backup folder like it should... until next time. I just want it to back up normally, both of them, without asking me anything first. Until now, I've just disabled automatic backups for my Mac Mini and would backup whenever I felt needed.
I filled up a 250gb My Book external drive using Time Machine. Replaced it with 500gb My Book and now can't read the old 250gb one when I reconnect it. My iMac doesn't recognize it. (I lost a large picture folder that is now only on the 250gb drive).
I recently bought a new MacBook Pro with Retina Display, and when asked to restore files from Time Machine during Setup Assistant, I receive the error "You can't restore this backup because it was created by a different model of mac."Â The machine that I had was a 2011 MacBook Pro 15" and I regularly backed up with Time Capsule using Time Machine. Â
The most important thing for me is to transfer over all of my applications, my iPhoto and iTunes libraries, everything in my keychain, and all of my documents. The reason I'd prefer not to use Migration Assistant is because I don't want to do any of that manually, I'm just trying to find a simple solution that will restore to a previous snapshot with quick, easy steps.Â
Info: Time Capsule 802.11n (4th Gen), Mac OS X (10.7.4), Mac Book Pro with Retina Display
I've upgraded to mavericks. Everything works fine except Time Machine. I want to continue using my 'old' time machine backup on an external server. When I try to reconnect I get the following message: The disk image "..." is in use Try ejecting the disk image.
I have disconnected and reconnected to the external server. This had no effect. At first glance it seems I am able to access my old backup clicking "Browse other backup disks". But the I don't get my backed up files. It's stuck at today Â
I have a 1tb external for time machine back up and have about 750 gb of stuff to back up. I was under the impression that when time machine backs up my stuff it will automatically delete the oldest backup to create room for the newer backup.
My problem is that i did a back up a couple weeks ago and then today i go to back up and it tells me back up failed only 718gb available for 740gb of stuff to back up
I'm using Mac OSX 10.7.3. Since a few days, I've some trouble with Time Machine. When TM would create a new backup in the normal hourly loop it creates the message: Time machine has completed the review of its backups. To improve the reliability time machine must create a new backup.
Now I've to options: 1. I can create a new backup later 2. create a new backup I don't want to create a new backup, I want to use the old one. I still have enough space on my backup volume. I'm using the Airport Extreme and a WD hard drive.
Info: MacBook (13-inch Aluminum Late 2008), Mac OS X (10.7.3), Time Machine
After updating to Lion server, I moved my Drobo over and setup Time Machine
Many users are prompeted to reuse or create a new backup.
The problem is I log in with credentials of 'USER A', and on the dialog it lists another 'USER B', userb.sparsebundle as the file to reuse. Â
I recently had a iMac hard drive die, and i tired to use the time machine on the server, with 'USER A' credentials, i got 4 listings and none of them were 'USER A'Â
I check the drobo and 'USER A''s sparsebundle is there. I have tried changeing permissions to read the sparsebudle, but the bundle is a 250k file, not a diskimage of the files even. Â
How do i resolve this problem of the wrong users coming up on "reuse or create new backup"?Â
How do i access the lost sparsebundle that i cannot log into to get the files for the user that needs them?
I have a mid-2008 (June) MBP 15". Just upgraded to SL last night. I am having a serious issue with time machine. I've been using it with the same external HD since I bought my mac last year. No issues up until I installed SL last night. This morning (my first backup since upgrading), time machine started backing up (~ 9Gb) but just stops at around 300Mb. The clock keeps spinning, but there is no change in the amount backed up.
I'm reading that other folks are having this issue as well. Has anyone figured something out?I've run disk repair (nothing found), restarted my mac & external HD (several times each), and cancelled and restarted the time machine backup (several times). Each time it freezes at a different amount (i.e. 34Mb, 284.2Mb, etc...).
I have looked into this a lot already. It is to much that Time Machine backs up every single hour! It would be nice to set it to something like 3 or 5 hours. I have tried a 3rd party app to do this, but... If my computer was off or asleep when it was supposed to back up, it would get an error. It would not just do the backup when i turned it on or when it came out of sleep like stock Time Machine does. I have also seen a way to change the time incraments in the Terminal.(I am very good with it, not a noob) I have tried this and it screws up time machine completely. Maybe it does not work with the newest OS X. By the way... I have a 2010 MacBook Pro, got it 2 months ago.
Does anyone know a solid 3rd party app, that will work seamlessly. Or has anyone changed the time in Terminal and are currently using something different than 1 hour. There is a lot of examples online, but I would like the codeing that you literally used.
I am getting the following error from Time Machine when doing my first backup. The startup disk being backed up, and the TM disk are both the same size.
Macintosh HD: 465.44 (total); 393.99 (free); 71.45 (free) Time Machine: 465.44 (total); 465.29 (free)
The Time Machine error is: Quote:
"This backup is too large for the backup volume. The backup requires 472.7 GB but only 465.3 GB are available." why would this be? Other disks are excluded from the backup, and Time Machine is telling me that it needs more space than it actually needs. What should I do?
i'v just lost important files when my new backup on an external HD using Time Machine deleted and wrote over a previous one ... informing me after (!) deleting (and why not before) . Is there any means for me to recover these files : mainly pics and music?
From time-to-time I obsessively reinstall Leopard on my MacBook Pro. I clone my drive to an external, install Leopard totally clean (erasing everything), and then drage back the contents of my home folders. I don't transfer anything from my Library folder, I like to start completely clean and rebuild my settings manually. Yes, I'm obsessive, like I said from before.
So now I've got my clean Leopard install. Everything is perfect. How do I back up to the existing sparseimage that's on my Time Capsule?
I realize it will be a fairly large first sync, but I'd love to still be able to grab deleted files from last October if need be.
Anyone know of settings or .plist trickery to make this happen? Can I simply choose that sparseimage in the Time Machine system preference?
After searching the internet for a couple of hours I've given up and I'll bother you all with a question.
I've been using Time Machine since around december when I got a 1TB external LaCie. I've partitioned 250gb of it to back up the 180gb OS X partition on my mbp (yes I know it's not a ton of space for backup). It's been working wonderfully for 6 months. Even saved me once, found a file I had accidentally deleted.
I've had absolutely no trouble until yesterday.
I plugged in my Time Machine drive after 3 or 4 days of running around with my mbp and doing some light work. A few minutes go by and Time Machine has calculated that 85gb (usually it's at most 1-2 gigs for a full day backup, no idea how it went up to 85) and that there are only 74gb available, so the backup fails.
That's odd, so I try again. Same thing. So I enter Time Machine and I find that only one backup date is available, June 10th. Apparently the last time it was plugged in. So I exit Time Machine and browse through the drive itself via Finder and find that, sure enough, there is only one backup folder in existence. It seems like Time Machine deleted all my previous backups in order to fit this massive 85gb 4 days backup.
So does this mean everything is really gone, and that's why it wants to backup 85gb (just over half of the used space on my drive)? I'm pretty confused as to why this would happen, and what it means.
Any other options other than wiping and starting over?
Today I bought an iMac to replace my 2009 Mac Mini. Since the iMac had already been set up, I just transferred my data from Time Machine to it through Migration Assistant. A couple hours later I noticed that all my previous Time Machine backups from my Mac Mini didn't transfer over and that Time Machine had reset itself up.
Is there any way I can transfer over those previous backups from my Mac Mini to my new iMac? I know OS X Lion has a feature to do this, but both computers are running Snow Leopard. I am using a WD 2TB My Book for all my TM backups.
Info: iMac (21.5-inch Mid 2010), Mac OS X (10.6.8)
I have an external that I use with Time Machine, however I don't need incremental backups. Rather, what I would like is only one backup so that I can save space. In this backup, however, I would like specific things to change that change on my computer, as TM already does with its incremental backups. So basically I just want to condense the function of TM into one single backup that will update whenever I back up again. I realize this is not the primary function of TM, but is there any way to make this possible? Or is there any other software that would do this? I've heard of Silverkeeper and Retrospect, but never used them.
I switched from a Mac Mini to a Retina Display Macbook Pro. When I hooked up the external drive I've been using for Time Machine to the MBP, I went through the setup for Time Machine and it created a backup of the MBP. That is the only backup now showing when I enter Time Machine. How do I access the previous backups from the Mac Mini through Time Machine? If I open the external hard drive from the finder, I can see the backups on the drive.
Info: MacBook Pro (Retina, 15-inch, Mid 2014), OS X Mavericks (10.9.4)
Yesterday, I got a disk read error when starting up Windows under Parallels Desktop. After some sleuthing, I found the offending file, and was about to restore from my Time Machine backup when I decided to make sure the disk wasn't going south. I booted off a second, backup, system drive that I keep just for this purpose, and ran aDrive Genius disk scan on the main system drive. All good, only 6Â bad blocks on a 1T drive. I ran this overnight, as it takes an hour or two.Â
This morning, after seeing this result, I booted from the internal system drive, located the offending file again, and entered Time Machine to restore the data. What I found was that ALL of my Time Machine backup data had been deleted. The only data there was a backup from late last night, that WAS FOR THE SECONDARY DRIVE I HAD BOOTED FROM. Seemingly, Time Machine had quietly gone and killed all previous data, and started from scratch backing up my spare drive.Â
There was no warning, no notice, nothing. Over a years worth of backups were gone, and my Parallels installation is now shot, since I can't fix the read problem. I'm contacting Parallels to see if there is any other remedy. You can imagine how absolutely mad I am at this.Â
NOTE:Â
1) I did not touch the backup drive during the boot of the second drive, or the scan test. It was not re-formatted or touched in any way (other than by system software)
I was a PC user who recently moved to mac. I have a macbook (intel 2.2GHz, 2GB RAM, 250GB HDD). When I was using PC, I backed up all my data to a network storage device (Buffalo LinkStation 250 GB connected to a 802.11g netgear router which is supplied by Sky) using a program called SmartSync Pro, which worked very well. Although I can connect to and mount the Share folder on this drive when the macbook is connected to the network, Time Machine will not back up to it. It wouldnt even recognise the disk on the network.
So I went onto the trusty internet, and found that you can get time machine to recognise the Share folder. (This was obtained from: http://blog.imulus.com/george/software/using-leopard-time-machine-to-backup-of-a-network/)See my comment on their page at the bottom, number 66.
It recommended entering the following in to the Terminal: defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
Before attempting backup I have to go into "Network" and select the Share folder by double clicking on it. This seems to mount the volume. After this, it can be seen in Time Machine as a potential backup destination.
However, this method does not work for me. Time Machine "prepares" for a while, then gives the following message: Time Machine error. The backup disk image could not be created.
More internet searching took me to macosxhints which suggests creating something called a sparsebundle image on my local system. (http://www.macosxhints.com/article.php?story=20080420211034137) Have not tried this yet as I thought it would be prudent to seek some help first.
Apple have deliberately disabled the ability for Time Machine to back up to network attached storage, (except of course to their proprietory Time Capsule):
Is this because time machine requires a network faster than 802.11g?
Is this because a time machine backup to a network attached storage device is unreliable and the data is corrupted?
I dont want to shell out more cash for a time capsule. I would prefer not to have to hardwire to an external drive (which I will also have to go out and buy). Any thoughts?
I just purchased a Seagate 3 TB USB 2.0/3.0 external drive to use as my time machine backup drive. I have a MacBook Pro that was purchased about 3-4 years ago. The MacBook Pro has a 120 GB hard drive and is currently running MAC OSx 10.6.8. I also have another WD 1 TB FireWire external drive that I use to store all of my media files. Â
After I followed the instructions for installing the new Seagate drive for use with the MAC OSx, I initiated a time machine backup. It very quickly determined that it needed to back up almost 900,000 files totaling just about 400 GB. It started the backup process at a rate of about 1 GB per minute. In a little less than an hour it reach 53 GB and remained there for an additional two hours before I decided to stop the backup. Â
Once I got the backup stopped, I deleted the backup and decided to look at my energy saving settings. I noticed that the "Put drives to sleep whenever possible" check box was checked, so I unchecked that option and restarted the MAC. I then initiated the time machine backup again. Like the first time it quickly determined that it needed to backup the same amount of data as before and started the backup process at a rate of about 1 GB per minute. Before going to bed at around 11 PM last night it was at about 60 GB so I thought I was out of the woods (having gotten further than the 53 GB earlier). When I woke up this morning at 5:30 AM it was sitting at 69 GB.Â
I am really frustrated at this point and don't know why the time machine back up would be failing on a brand new hard drive. PS - I was previously using a Seagate 1.5 TB USB drive as my time machine backup and never had any issues with it. I decided to use the 1.5 TB drive for a different purpose, which is why I have the new 3 TB drive to use as a backup. And I still have the full backup on the 1.5 TB drive just in case anything were to go awry.
I have a external HD which has always worked fine under snow leopard. Since upgrading to lion I keep getting the following message The identity of the backup disk has changed since the previous backup.The disk may have been replaced or erased, or someone may be trying to trick your computer into backing up to the wrong disk. And after this the drive disappears from the desktop appearing agian only after restart. What can I do do rectify this? Delete and re-intialise the drive?
Just wanted to check if he problem was unique to my MBA (Rev B, HDD) or you notice it too ;
My Time Machine backup takes up to 6 hours to do a backup of about 30GB. And each backup size is 31.5GB everytime !!
I have the following Config - 80 GB for OSX (53GB Free) and 40 GB (10GB Free) for Win 7 on Bootcamp. Sometimes I wonder if TM making a backup of Win 7 also everytime. (Does it mean - In a way its good, that means I should be able to restore the entire hard disk from TM including Applications, Win 7 , bootcamp and all the programmes installed in Win 7 in case I have a problem ?)
But the speed should still be fast... 6 hours to do a 32GB backup is torturous specially because then I have to leave the machine alone and cannot use it.
Is there a way to make a backup of your Time Machine backup on a 2nd hard drive? I want to be doubly sure that my data is backed up!Right now I get an error saying that the second hard drive isn't authorized to copy my Time Machine data from the original hard drive I have set up as my Time Machine.
I just replaced my HD on my 15"MBP. The install went well until restoring my data from Time Machine. The apps came over fine but none of my data did. Yes, I checked all the boxes on the "restore from backup" menu.
Of course now when I start up time machine the backup isn't there. How do I get Time Machine to recognize the backup? I have it on two places - a time capsule and a separate external HD.
I just replaced the stock 160GB HD in my unibody macbook with a WD Blue Scorpio 640GB HD. I used Super Duper to clone the old drive to the new one, approximately 115 GB.
Now Time Machine wants to backup the full 115GB to my Time Capsule, which kinda sucks because it's going to be a redundent backup that's gonna take up over a 10th of my TC's space. Is there any way to avoid this and still use Time Machine?
Well TM is acting up. I get an error that reads: "This backup is too large for the backup volume."
Both the internal boot disk and the external baclup drive are 1TB. The internal one has a two partitions, the OSX one that is 900GBs and a 32GB NTFS one for Boot Camp. The external drive is a single OSX Extended part. that is 932GBs.
Both the Time Machine disk, and the Boot Camp disk are excluded from the backup along with a "Crap" folder for temporary large files.
Time Machine says it needs 938GBs to backup only the OSX disk, which has 806GBs in use with the rest free. WTFFF?
This happened after moving a large folder (128GB in total) from the root of the OSX disk over to my Home Folder.
I have reformated the Time Machine drive and have no backups at all of my data and it refuses to backup!!
Why would it need 938GBs of space to backup if the disk has "only" 806 GBs in use??? Is there anyway to reset Time Machine completely???
my TM wil not back up! It states that this backup is too large for the backup disk. The back up disk requires 573.50 GB but only 225.23 GB are available. The TM needs work space on the backup disk, in addition to the space required to store backups. Upen TM perferences to select a LARGER backup disk or make the backup smaller by excluding file.Â
Okay I;m sorry but obvioulsy I dont get this. I've never called Apple for help! I have every product they sell practically including Protection Plans I never used and no one will help me with this. My MAC is starting to have black or white screens and i can hear it running but it will not do anything so i have to reboot it, it screws up Enturage and then I have to rebuild that ( 5 times this year) anyway... I would like to back everything up- can I delete everything on the Time Capsule or Time Machine; god I dont even know what it is called Im so MAD... help if you can please. I'm going to have to take this to the genius people at the store and probably buy another computer but like before they will not save my files.
A: an old macbook (the white one) B: a modern macbook pro (retina) C: another modern macbook pro (TBD)Â
I am giving away B now; I expect to get C in 2 months time; I keep A with me all the time.
The goal is to migrate all of the data from B to C. I have Time Machine backups of B.
Since the transition is a long time (2 months), I need to keep working on my data during this period. For this I will use A. This will generate new files, modify old ones, ...
Since A's HDD is much smaller than B's backup, I can move only part of them.
By the way, I have totally erased A and used migration assistant to restore part of my old data from B. So, when I use A now, I do it with my same account as in B (and the same I will use in C).
How do I manage my backups in such a way that, when I will get C, I can safely move all of the data I had in B plus all of the changes and modifications that I have done during the 2 month transition?
Can I just continue to use Time Machine (on A) to update the old backups? I am afraid that some mess could be created because the computers are different (before the backups were taken on B, while now on A), even the present data are different (because now A only contains a subset of the original B data, which I do NOT want to lose), the good point is that the user is the same.
I have an external 500gb drive plugged into my brand new Time Capsule. The 500gb drive basically stores my entire library of music and my iTunes points to this external drive.
Is it possible to have time machine backup all information on the 500gb drive to the time capsule, so encase the external drive takes a dump, I don't loose my entire music library? Maybe time machine is already doing this, I am not sure.
I have a MacBook Air and a Time Capsule - both from november 2011.Using Time Machine is givning me som problems.It works fine for some days, an is backing up as planned.But at least 5 times since I got the Time Capsule, Time Machine is asking to make a full Backup, and when I look in Time Machine, it says that there is no "old backup". It has been runing since november 2011.When I start a new backup, as it ask for, it takes at least 24 hours to finish - some times even longer.Is this normal? If not, what do I do?
