MacBook Pro :: Getting Over Heated - USB Device Drawing Too Much Power Has Been Disable

Dec 1, 2014

I have Macbook Pro Early 2011. recently my USB device stops working and I am getting message " The USB device drawing too much power has been disabled"and MacBook Pro getting over heated.

Info:
Mac Pro, OS X Mavericks (10.9)

View 3 Replies


ADVERTISEMENT

MacBook Pro :: USB Device Drawing Too Much Power

May 18, 2012

I keep receiving this message, over and over, sometimes stacked 6 times or so, but the only issue is that I have nothing plugged into my USB at all. I tried restarting, but it didn't work.

Info:
MacBook Pro, Mac OS X (10.7.4)

View 3 Replies View Related

OS X :: USB Drawing Much Power - No Device Hooked Up

Aug 14, 2010

Just recently, I keep receiving an error, every couple of minutes or so, thats states: "A USB device is currently drawing too much power. The hub to which it is attached to will be deactivated." Now I have seen this same problem posted, but I have No Device hooked up at all. I have a 2 year old macbook pro 2.4 GHz, running 10.5 I've tried rebooting but it continues to occur.

View 3 Replies View Related

Intel Mac :: The USB Device Drawing Too Much Power Has Been Disabled

Jul 6, 2012

I'm using iMac with wireless mouse and keyboard.Once,I've unplugged flash memory directly without eject, USB error message shown on the screen,After that,although I've removed all of usb devices&cables on the connector,But USB error message always pop up periodically.I tried SMC reset, But issue still existed?

Info:
iMac, Mac OS X (10.6.8)

View 4 Replies View Related

OS X :: USB Port Drawing Too Much Power - The Device That Is Plugged Into It Will Be Deactivated

Sep 13, 2006

I get this strange message every so often, sometimes more often than other times. It says:

USB port drawing too much power. The device that is plugged into it will be deactivated.

There are only two things plugged into the USB-The keyboard and mouse. When I get this message, the mouse freezes. If I jiggle the mouse cable where it is plugged into the USB, it comes back and everything is fine until this message comes up again.

View 13 Replies View Related

MacBook Pro :: USB Port, Drawing Too Much Power - A USB Devise Is Currently Drawing Too Much Power And The Port Will Be Deactivated

Oct 2, 2006

This is my first post on the forums, although I'm planning on looking around in here once in a while, to see what people are posting.

For starters, I just wanted to tell you about this little problem I've been having with my MacBook 1,83GHz.

Sitting at my desk at work one morning, peacefully drinking my coffee, I suddenly received a rather discomforting error-message from my shiny new (about 1 month old) MacBook;

"A USB devise is currently drawing too much power and the port will be deactivated.".

View 2 Replies View Related

MacBook :: Usb Drawing Too Much Power?

Jun 17, 2012

an error message comes up when i try to plug in my iphone. it says usb drawing to much power.....?

View 1 Replies View Related

MacBook Pro :: Saying That USB Ports Are Drawing Too Much Power

May 24, 2012

In the last two weeks, every time I plug my Apple 27" display cables into my macbook (power, display and USB connections), I get the following error message on my screen about USB ports are drawing too much power. I don't have anything plugged into the USB ports on the back of my display.

Info:
MacBook Pro, IMac, Mac Mini, etc., Mac OS X (10.4.8)

View 2 Replies View Related

MacBook :: Keep Getting A Pop Up That Says USB Is Drawing Too Much Power And Will Be Disabled?

Jun 22, 2012

I keep getting a pop up that says USB is drawing too much power and will be disabled, I do not have any USB plugged into computer

Info:
MacBook

View 1 Replies View Related

MacBook Pro :: Disconnects IPhone Everytime Saying The USB Is Drawing Too Much Power?

Apr 14, 2012

Tonight I've been transfering all my files over from my old MacBook and everytime I try to connect my IPhone 3GS by USB to my Mac a message comes up straight away saying "A device conected to your computer is drawing too much power, apple has disconected this device to prevent damage occuring to your computer" 

I have tried to connect my phone numerous times while it has been conected to the power cord and also running on battery.

It also took my new Mac a good half an hour to recognise my external hard drive was connected and let me use it.. 

I have had this problem once or twice with the same IPhone and my old mac so im thinking it may be a problem with my phone considering it is 2 years old now?

But then again, my old mac that is nearly 4 can still connect to my phone when my new MBP can't.  

Info:
MacBook Pro

View 1 Replies View Related

Intel Mac :: USB Drawing Too Much Power?

May 10, 2012

My iMac says my wacom tablet is drawing too much power and won't allow it to run. This has never happened before. I've owned them both together for about a year.

Info:
iMac, Mac OS X (10.6.8)

View 5 Replies View Related

Hardware :: Apple Keyboard Drawing Too Much Power

Feb 17, 2010

Well, I just recently received a used wired apple keyboard, but whenever I try to plug it into any USB port, I get the following error: Even when I unplug every other USB device, I get this error. I'm using a Mac Mini.

View 8 Replies View Related

Intel Mac :: One Or More Of USB Devices Disabled (Drawing Too Much Power)

Apr 8, 2012

Getting error message USB device was drawing too much power from your computer, one or more of your USB devices have been disabled.

Info:
iMac

View 3 Replies View Related

Intel Mac :: Apple Wired Keyboard Allegedly Drawing Too Much Power

Mar 13, 2012

Whilst working on my iMac as per normal, I get this little window that pops up declaring that a USB decice is drawing too much power from my computer and as as a result, one or more of my USB devices has been disabled. 

This is not an alien dialogue box to me, I have seen it many times. The problem this time is that, when I removed all my devices to see which one was causing the message to pop up, I discovered that it was my keyboard that was misbehaving. 

When the message pops up it states that the offending device has been disabled. This cannot be the case however, as I am able to press enter to close it, and if the keyboard truly is the problem then I shouldn't be able to close it with enter because it would have been disabled... right? 

Wondering if anyone else has had this problem. My keyboard is the standard wired + number pad one shipped free with new iMacs. It's not a custom one, it's apple stock through and through.  

The baffling thing is that this has only just occured. In the year or two since I bought my iMac it's never been a problem.  

Yes I have tried using a different USB slot, and no that doesn't fix it.  

This box keeps popping up unless I disconnect my keyboard which of course is no way to use the computer, and I don't have a spare keyboard handy.

Info:
iMac, Mac OS X (10.6.7)

View 2 Replies View Related

OS X :: Back To My Mac Says Disable A NAT Device?

Oct 22, 2009

I'm trying to get Back to my Mac working, but it's saying that I have more than one device that's using NAT, and to disable NAT on one of those devices.

I've attached a screen shot....

Here's my setup...
DSL Modem + DIR-655 (DLink wireless router).

Could both of those have NAT enabled? I obviously wouldn't be able to disable NAT on the modem if it does, but how do I do this on my router?

I've googled like crazy and I can't find the solution.

I've disabled both the DNS Relay and the DHCP server on my router.

The firmware of this router is 1.11. Should I update it?

I'm running Snow Leopard.

Why can't I get 802.11n speeds? I've attached a related screenshot. It says PHY Mode is wireless n, but the speed is only 54? Happens with every N router I try to connect to.

I have a Late 2006 MBP that I installed the Wireless-N Enabler on.

View 1 Replies View Related

MacBook Pro :: Getting Error Usb Device Has Used To Much Power And Has Now Been Closed?

Jun 3, 2012

my macbook pro had an error in regards to something like a usb device has used to much power and has now been closed. Since then the mac won't recognise any device i put into the usb port

Info:
MacBook
Pro

View 1 Replies View Related

MacBook Pro :: USB Device Disabled From Too Much Power Draw / How To Re-enable

Jun 19, 2014

i just recently got a keyboard i had back and plugged it in with a mouse i typically use all the time. when the keyboard was plugged in i got the typical message for "USB device drawing too much power, has been disabled…" i just want to re enable the mouse. it was quite obvious it was the combination of BOTH devices that caused this, but i'd really like to just get the mouse working again. I've Tried Resetting the SMC and ran the diagnostic but nothing has worked.

View 3 Replies View Related

MacBook :: Squeaky Noise On Hinges When System Heated Up

Nov 6, 2009

My macbook tends to make noise when I close it, this only happens when my mac is heated up, and it disturbs me because I bring my macbook to school and it's embarrassing when your mac makes those noises. Is it because of the screws? My contract is out of date, and I don't want to attempt anything. Also, my macbook been dropping connections since I upgraded to Snow Leopard, will 10.6.2 be able to fix this update?

View 9 Replies View Related

MacBook Pro :: The Disc Can’t Be Burned Because The Device Failed To Calibrate The Laser Power Level

Apr 26, 2012

Here's the deal on an old MacBookPro Intel Core Duo 2.16 GHz! The disc can’t be burned, because the device failed to calibrate the laser power level for this media. Basic problem is the dvd burner doesn't burn! 

Info:
MacBook Pro, Mac OS X (10.6.8)

View 2 Replies View Related

MacBook Pro :: Disc Can’t Be Burned Because Device Failed To Calibrate Laser Power Level For This Media

Sep 1, 2014

I have a mac book pro OSX 10.7.5 I am getting this message when trying to burn a cd: The disc can’t be burned, because the device failed to calibrate the laser power level for this media.

Info:
Mac Pro, Mac OS X (10.7.5)

View 3 Replies View Related

Power Mac G5 :: USB Device Not Recognized?

Dec 30, 2007

I have a total of 10 USB devices connected to my G5 Mac, including hubs, printers and scanners. Most behave fine, but one or two cause minor problems. The worst offender is a Sierra Wireless 875U Aircard, which is a wireless broadband modem I got through AT&T. I use it for my Internet connection.

Every time I power up my Mac or bring it out of sleep, it won't recognize the 875U, even though it's plugged directly into the Mac's front panel USB port. I can't even see it on System Profiler. Having it in a different port or going to a hub port doesn't make any difference.

To make it work, I have to unplug it, wait a few seconds and plug it back in. My Mac then recognizes it and it works fine until I shut down the Mac or put it to sleep again. Granted, this is only a nuisance level problem, but it would be nice if the Mac recognized all the ports all the time. I'm running a duel G5 2.0 GHz under Mac OS 10.4.10. I see the exact same problem in my G4 iBook (1.0 GHz) also running Mac OS 10.4.10.

Information:
Dual G5 / 2GHz
Mac OS X (10.4.10)

View 6 Replies View Related

Power Mac G5 :: Can't Transfer From Usb Device Without Corruption

Dec 3, 2007

I hope the following problem is not too long winded. we have 3 identical Dual 1.8Ghz G5 Power Macs all with 30" Apple LCD screens, when any usb storage device is connected powered or unpowered, memory stick or hard drive, any pictures copied over to the mac are corrupt (lines through them, half the picture sheared off to the left or right, half the pic in another colour etc). f i connect the device to one of our older G4 machines or one of our new imac's there is no problem.

Information:
Dual 1.8Ghz G5
Mac OS X (10.4.10)

View 7 Replies View Related

OS X :: Disabling Power Button Or Temporary Disable?

May 4, 2008

Yea, my friends find it quite hilarious to push the power button and then pressing enter really fast which results in my computer shutting down.

I was looking for an app that would make it so the power button would only work when caps lock is on or something similar. It's just really annoying.

View 23 Replies View Related

Mac :: IMac Is Getting Heated Up Very Quickly?

Jan 22, 2010

I feel my iMac is getting heated up very quickly...Please see the temperate and tell me whether is it ok or not ??btw, the mac is ON for the past 6hrs

View 13 Replies View Related

Intel Mac :: Display Is Getting Heated Up?

Apr 18, 2012

I hav an iMac 27" version 10.7.2 with 4GB ram. The display of my iMac is getting heated up pretty badly! I can barely touch it!

Info:
iMac

View 4 Replies View Related

Intel Mac :: 21" Is Getting Very Heated, Nearly To 60'C?

Jun 22, 2012

i just bought an imac, its getting really heated. it gets heated upto 60'C. is that normal? if not what should i do?

Info:
iMac, iOS 5.1.1, 21" iMac

View 1 Replies View Related

Hardware :: USB Device Cannot Draw Enough Power To Operate Properly

Jun 3, 2010

This is a problem that's been bugging me now for a while: when I plug in my iPhone or even a measly Usb Flash drive into my Apple Keyboard's USB port, a message appears on my Mac's screen saying: "A USB device can't draw enough power to operate properly. If the device came with a power cord, plug it into an electrical outlet. Otherwise, connect the device to a USB port on your computer." Does anyone know why the Apple Keyboard has a weird indented USB connector?

View 3 Replies View Related

OS X V10.7 Lion :: Blue Yeti Mic - USB Device Requires Too Much Power

Mar 19, 2012

I was looking through the posts on here and the only solution I could find was to reinstall Lion, so I did, but it still doesn't work. Everytime I plug the mic in it says, "USB device requires too much power." I just bought the mic. I tried calling the Blue mic costumer service but no one answers.

View 2 Replies View Related

IMac :: Won't Switch On - It's Heated And Dead?

Oct 14, 2009

Its a G5 iMac ihave been using for abt three years now. first i got the vertical stripes about two months ago and today when i tried to switch it on, it won't. I turned it off last night after use and when i tried this afternoon, it was hot and it does not turn on?

Is this the end of her life? has anyone face this before?

View 4 Replies View Related

MacBook Pro :: Cannot Find And /or Print To Wireless Device Even See Device Listed

Jun 5, 2014

My Macbook Pro has been running into constant problems actually printing to any wireless device.

Info:
MacBook Pro, OS X Mavericks (10.9.3)

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved