MacBook Pro :: Its Unable To Start
May 22, 2012My Macbook will not start. The battery is fully charged.
Info:MacBookPro
My Macbook will not start. The battery is fully charged.
Info:MacBookPro
On my macbook pro I am unable to start it up, I get the screen that asks me to hold dow the power button until it turns off, then press the power button again. It just keeps doing this over and over
Info:MacBookPro
After having updated my iTunes, I restarted my Mac. The battery then went out and now I can not start the machine. The screen is white with the apple, and a spinning wheel under it. How do I start my Mac?
Info:
MacBook Pro
System will not start. I now have OS Lion. I can not use the start up disks as adviced by others. My start up disk is OS Snow Leopard. I installed OS Lion. What do I do now?
The Snow Leopard start up disks tells me "Mac OS X cannot start up from this disk."
I have just erased my hard drive (after backing up) and installed Mac OS X Snow leopard from my install disk, I then copied all my files over from the backup (using time machine) and it said everything was successful and that i should login with my password. Â
However, the password i had previously used did not work and neither did leaving it blank or anything else i could think of so i booted using the install disk and reset my password. I restarted and couldn't get past either a blank blue screen or more often a grey screen with a small wheel on it. I tried logging in with safe mode and got to the login screen but my keyboard didn't work (despite being able to hold shift to boot in safe mode) and though i could move my mouse, i couldn't click on anything.Â
I have tried resetting the PRAM, Repairing the disk and its disk permissions but nothing changes.
Info:
MacBook Pro
I have been running low on memory space for a while and just recently I turned my laptop on and all I saw was a blue screen. Fortunately there was still a bar on the top of my screen and I was able to access Safari by selecting the apple icon->Recent Items->Safari. I still cannot see the time or any of the other features. Safari seems to be the only application I can open, my itunes won't open and neither will just about any other application.
Info:MacBookPro
unable to start - it's showing question mark
Info:
MacBook, Mac OS X (10.6.8)
Everytime I open up my lap from its sleep mode and try to connect to a website it says, Unable to connect to the Internet. My network connection shows an active connection to the access point. I know the problem is the DNS. When the system is in the state of saying it can't connect to the internet I can both ping my local router, and through an IP for yahoo.com into the browser and have it resovlve.Â
Once I start my system and let it wait for 30 to 60 seconds it will finally work. For some reason the DNS is waiting for a while to kick on.Â
I got my first Mac last Sunday (woo!) but I was using it last night and a battery warning came up. I had been using the MBP, then turned it off and went out with battery still remaining. When I came back again a few hours later I used the Mac and after about 10 mins closed the lid for some reason. When I opened it back up it wouldn't start unless I plugged in the power outlet - the thing had completely drained. Then I checked the battery and it says to 'Service Battery'. It's now holding a charge as normal as far as I can see but the warning is still there.
A couple of other things I notice too:
- When I tilt the MBP to the right sometimes a scraping noise comes from the inside - maybe from a fan?
- When I pick it up from the bottom, the bottom of the Mac dips inwards slightly and there is a click as it makes contact with something on the inside of the case.
Are these things normal? I've made a Genius Bar reservation but I think I might just swap it for a new one.
Can you guys figure out this problem? Whenever i start a video chat my screen goes grey as seen below.
Does anyone also have this problem? Ihave the new Macbook (alum)
I've got MacBook Unibody late 2008 and Snow Leopard. I've got an issue, becouse sometimes when I turn on my MB it shows on battery bar 0%, and when I look to the iStat Nano/coconut battery it shows that battery capacity is about 3%, sometimes I cannot turn on my MB, but it was fully charged a few minutes before, only if I connect AC Adapter and it starts also with this Service Battery. But after some restarts everything goes normal. Capacity is 100%, battery charge is same as before this issue (or a bit less, due those restarts etc...
Sorry for this chaotic explaination, but it's really annoying, I do not think that I should buy a new battery, becouse it has 166 cycles, so it is not so much to change battery (I don't think it's nothing, but of course it is not huge no. of cycles). I tried to restart SMC, calibrate - but it does nothing.
My i mac dont start
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)
My iBook G4 (10.4.11 with 512MB) will not start up from the DiskWarrior disc.
I insert the disc and restart the computer holding down the C key until the screen comes up with the program on the screen and then let go of the C key.
The computer then promptly shuts down.
I have not had this problem before.
I have repaired the permissions using Disk Utility.
Recently i Change my HD Get Info for Public Read Only to No Access.After Shut Down MacBook Pro(10.6.8)when i go to start my mac its unable to open Log in Menu just Loading bar is moving.I wait long time but its unable to open OS than i have to force to shut down. Now i am unable to start my MacBook Pro.
Info:
MacBook Pro, Mac OS X (10.6.8)
My battery needed replacing for a couple of months before i dropped it from about knee level onto a sidewalk. After the drop I got the not charging icon. I thought maybe the battery had just finally died. so I did not panic about the no charge. The laptop works fine when plugged in to power with the old battery on or no battery at all. Not at all when unplugged.
When I put the brand new battery on the lap top, the computer shuts down halfway through boot up. I tried holding the power button down through boot up reset, as well as removing all power (plug and battery) and holding down the power button for 10 seconds reset.
I currently have my second MBP that I got from Macmall and both in a matter of two weeks have had similar issues. The first I managed to get returned and replaced, that is a seperate and complicated story in and of itself. This particular issue started with a boot up sequence that was taking about 5-6 mins. After going through the drill with Applecare thought I could restore using Time Machine. That's when I found out that the FW400 port no longer worked to power my Oyen Digital 250G FW drive. Any thoughts as to what might be the problem? This is my second MBP and Oyen Digital FW drive. I had them both replaced!
View 10 Replies View RelatedI recently purchased an IRIScan Express 2 single sheet scanner to use as a portable, After installing the IRIS, I find that my Epson 1250 flatbed scanner will not start. I am running OSX 10.5.8 on an intel mac tower. Has anyone had this problem with two scanners on the same operating system or on the same hard drive? I could use an external hard drive to run one if that is the only solution.
View 1 Replies View RelatedI have a new MP Quad and I am noticing that I am always having to repair my startup disk. I will notice the system start to slow down, I will have Onyx verify startup disk and it tells me to repair it. I will boot to SL DVD, repair the disk and it will run fine for awhile but eventually end up in the same situation. Do I need to reinstall SL or is this a hardware issue?
View 4 Replies View RelatedI have a Powerbook G4 17 that I have been working on. I recently replaced the screen and verified that it worked prior to buttoning it back up. When buttoning the powerbook back up, I nicked two wires with screws. One was part of the LCD wire that comes from the LCD itself. The second was the airport wire that is wrapped around the screen. I wrapped them back up with a cover and preceeded to get using my comp again. Once finally put back together, I could not get it to turn on.
View 1 Replies View RelatedIt bounces, and then hangs.
i trashed the prefs, the library, and reinstalled. any ideas?
I load the OS, get to my desktop and i don't see any clock, wireless or battery. it soon went to blue screen, then back. now it is changing between 2 shades of blue.
View 1 Replies View RelatedI bought a powerbook off ebay, it worked but on startup occasionally a folder icon would appear. I rebooted from the original discs which seemed to do the trick. However the original discs are too old for many of my apps, so I bought some newer install discs (osx 10.5) I put the install disk in and got the panic message 'panic: Im hanging here'
The answer seems to be to run a disk repair (am i right?) However to do that I need to eject the install disc, I can't get the install disk out and of course it keeps tripping up everytime I start it. There is no secret little button to eject the disk manually. I have tried holding down apple and S but the install disk over rides everything and trips the mac up. I think ill be okay if I can just get this disk out.
On my Mac Pro i have windows XP on hard drive number 2. I went to boot to it today after installing a program and nothing happens. The monitors are receiving information but there just a black screen.
Not sure what i should do considering that i can still access the drive and files from the MAC Side. I can also get to the boot screen to select safe mode but that also does nothing.
It is a early 09 Mac Pro...i have been using the computer this way since last April. Cant figure out what happened.
A few days ago my school blocked msn messenger and adium both going through my [URL]
I've used online messaging sites such as meebo.com and web messenger but i was just wanted to know if theres an application for mac that will allow my adium/msn to log in such as a proxy application that will bypass the firewall or somthing.
I suspect a software extension and to test this I tried going into my Administrator Account to see if the problem still occurred. However I find that iTunes refuses to open in my Admin Account. I get an error message instead saying "The folder "iTunes" is on a locked disk or you do not have write permissions for this folder." iTunes is in my Applcations folder on mi iMac's hard drive that as far as I know isn't locked. Â
I have examined the Permissions. Only the last one (Everyone) was Read only. The other two were both Read/write. Changng the last to Read/write also makes no difference. I have run Disk Utility to repair permissions. No change, still this error message and iTunes refusing to open.Â
I don't know if this is connected to the crash I get in my User Account. Both the iPod Nano and Color appear on the desktop and both make iTunes boot as soon as they are plugged in. With both machines iTunes crashes imediately and generates a report to Apple.Both machines display "Do not disconnect" until I eject them via the desktop. I have done a hard reset of the Nano several times to no avail. I've not done this with the Color yet. The iPod Touch has been behaving itself. However I have just plugged it in and it now neither appears on the iMac desktop nor does it fire up iTunes anymore.Â
Info:
iPod touch, iOS 5.0.1
I was reinstalling a printer driver and my power cut off while it was installing.now the computer wont start and i get this message below... I read to use the install dvd but my CD drive is broke and wont take cds. I did manage to hook it up to my dads computer with target disk mode so i can access files. his computer is a windows though. i do have a copy of the Leopard install cd saved as a DMG on his computer and a 8gb flash to boot it but i cant format the flash drive to be mac extended journaled GUID from his computer.IS there a program to do this???I dont know what needs to be fixed or where i can get this acpi driver? can anyone help because i dont have any money to get this fix and i need my mac for college which im starting soon.This is the error message
panic(cpu 0 caller 0x004384FF): "unable to find driver for this platform: "ACPI".
"@/SourceCache/xnu/xnu-1228.12.14/iokit/Kernel/IOPlatformExpert.cpp:1407
(That is the first line. It goes on to say...)
Debugger called: <panic>
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
(then there are 7 lines that start with 0x2f5d3 followed by)
Backtrace terminated-invalid frame pointer 0BSD process name corresponding to current thread: Unknown
Mac OS version:
Not yet set
Kernel version:
Darwin Kernel Version 9.7.0: Tue Mar 31 22:52:17 PDT 2009; root:xnu-1228.12.14~1/RELEASE_I386
System uptime in nanoseconds: 180744654
I am running mac os x 10.5.8. I want to run the apache server, but i get the following error: (2)No such file or directory: httpd: could not open error log file /private/var/log/apache2/error_log. Unable to open logs. It is the first time I try using Web Sharing on my machine, but somehow it seems some files are missing. Is it possible to install the apache server anew?
View 4 Replies View RelatedTurn on Mac goes to grey apple screen cog wheels spins but its stuck there tried control option p and r doesn't do anything tried turning it on while holding shift key to try and get it in safe mode but that does not work either.
Info:
iMac, Mac OS X (10.4.11)
My 1999 PowerBook G3 "Lombard" does not start when I press the power button. Is there a way to force it to start without it, or do I need to get a replacement button?
View 9 Replies View RelatedI was just using my powerbook G4 12" when it "clicked", the screen went black and it will not respond. the power cable light is on, and I've tried another battery, but it does not turn on! the little light on the latch button that glows usually, is not on. What has happened to my Powerbook????! I don't have applecare but I imagine I will be calling Apple this morning unless someone can help here