tried hooking my MBP up to my external display with the mini display port dvi adapter and the screen on the MacBook Pro just flashes blue when I turn it on. This is the same DVI cable that I use with my desktop computer that works fine.
View 1 RepliesI have a 15" unibody MBP bought in Nov '08.
Had been using the Mini Displayport > DVI adapter just fine with both HDTV and Dell monitor, BUT then all output has stopped completely!
No monitor is detected by the laptop (although the display does blink blue, as if it had detected it), tried different cables, different displays, using the Displayport firmware update, speaking to Apple, deleting the com.apple..plist files, etc
Edit: it also doesn't work in XP on Bootcamp!!!?
None have worked even a bit!.. Also read lots of forum posts of similar problems, but I can't find a solution that works!
So I spilled a small amount of tea on the left hand side of my MacBook Pro a few weeks ago. I immediately disconnected the power adaptor, forced shut down and placed the laptop level in a warm, dry area for several days to dry out. On boot up everything performed normally, and has done since, except that when I tried to connect my laptop to my TV last week, nothing happened. I use a Mini DisplayPort to VGA adaptor and normal VGA cable to connect to my tv, and have done this many times before with no issues. The laptop normally automatically recognises that an external display is connected and outputs a video signal - an extended display under OSX Snow Lion, or a mirrored display under Windows 7 Ultimate x64 running in Boot Camp - now literally nothing happens, the laptop does not seem to recognise or react to the fact that the display is connected, and no video signal is output.Â
My laptop is covered under AppleCare, but I realise that, as this is almost certainly liquid damage, there is probably little that can be done to have this fixed on my AppleCare. What are my options? I don't wish to pay out of pocket for what could potentially be a costly repair, but if there is a possibility to get the Mini DisplayPort working again I would like to explore it.
Info:
MacBook Pro, Mac OS X (10.6.8)
So I've got a Macbook Air, a cheap 3d party miniDP to DVI dongle I just got from ebay that's connected to a DVI to VGA adapter which is in turn hooked up to an old-ish VGA monitor. The monitor isn't receiving any signals, so I'm wondering if I'm right in concluding that this setup isn't supposed to work?
View 2 Replies View RelatedI have an ATI Radeon 4870HD graphics card which has a Mini Displayport and a Dual-Link DVI port.
I'm connecting this to two Dell U2410 which each have a Displayport, HDMI ,DVI and VGA ports.
I can connect one of the monitors straight to the DVI port, but what should I do with the other? I can't find a Mini Displayport to Displayport adapter for sale in the UK. But there are Mini Displayport to HDMI adapters and Mini Displayport to DVI adapters available.
Also, would it be best to have both monitors on the same connection? If i go the HDMI route should I buy a DVI to HDMI adapter for the other port? Or have both on DVI? Will there be a visible difference between the monitors if they're not on the same type of connection?
I need to get a Mini DisplayPort to VGA adapter for my new MacBook Pro, but I know there are much cheaper ones about than the ones Apple sells.
Ideally, I'd like a single cable (rather than an adapter to plug a seperate VGA cable into) for a little less clutter on my desk, but if there's no decent solution I'll go with the adapter. I know most people recommend (URL), but I'm in the UK.
The Mac Pro people seem to have trouble with their computers hooked up to monitors using a MiniDisplayPort to DisplayPort connection. There might be issues both with cables and adapters:
[URL]
I'm trying to figure out if it's a problem specific to the Mac Pro video card or if it's a general issue that affects MacBook Air users as well. If you're connecting your MacBook Air to a monitor using a MiniDisplayPort to DisplayPort connection, could you please post which adapter+cable or cable (brands, links if possible) you are using with which monitor?
I have a new MBP 13", and I was wondering is it possible to use a Mini DisplayPort to DVI -adapter and a DVI-VGA adapter combined? Or is it just the safest way to buy both of the Mini DisplayPort -adapters (to DVI and VGA) separately, even though I would have an extra DVI to VGA adapter.
View 6 Replies View RelatedI'm gonna get the new MBP 13" really soon, and I'll need the Mini DisplayPort to VGA and to HDMI cables. Where, besides Apple Store, should I get these cables?
View 15 Replies View RelatedI am wanting to connect my MacBook Pro, which has a mni displayport, to my TV. My TV is still of the CRT variety, but supports component video (R, G, B RCA connectors). Has anyone has any luck doing this?
I have found mini DisplayPort to DVI-I adaptors and DVI-I to component video adaptors. Will connecting the two between my Mac and my TV provide me with a working solution?
I got the Aluminum MacBook late 2008 version and as most should know that the macbook comes with a Mini-Display Port. Today i went to buy a Mini DisplayPort to DVI Adapter because all my monitors at home have the DVI slot. I hooked it up and everything works fine as it should be. But next week i have a presentation to do in University and apparently my uni only have the VGA slot available, so therefore i want to know if it would work by hooking up my macbook with the Mini DisplayPort to DVI Adapter, then use a DVI-D to VGA adapter and finally a VGA cable to the Projector for the presentation?
View 4 Replies View RelatedI am trying to get my projector to display movies, tv, etc. from my MBP. I got the Mini DisplayPort to VGA Adapter but it doesn't seen to recognize any connections going out to the projector. It does not come up with the "mirror the display" option in the displays section of the system preferences. Is there a way to troubleshoot the Mini DisplayPort to see if it's working? I downloaded the firmware patch with the Mini DisplayPort to VGA Adapter hooked up to the projector but it was unable to install it since it said that the Mini DisplayPort to VGA Adapter was not detected! I'm thinking that there may be a malfunction to the Mini DisplayPort... Is there any way to check it? I tried 2 different VGA cables. The only thing left would be an issue with the adapter.
View 7 Replies View RelatedIS THERE A apple Mini DisplayPort to HDMI adapters
Info:
MacBook
Pro, Mac OS X (10.7.4)
I have a mid 2011 MacBook Air 13 inch with a single Thunderbolt port. I have the Apple Mini DisplayPort to Dual-Link DVI Adapter cable which I am able to use to run a Dell 24 inch monitor - this cable connects to both the DisplayPort/Thunderbolt port and also a USB port on the Air. I want to be able to run this Dell monitor, and also run a Thunderbolt hard drive - one with 2 Thunderbolt ports. Is this possible? Can I connect the DisplayPort part of the cable to the pass-through Thunderbolt port on the hard drive, and then connect the hard drive to the Thunderbolt port on the Air? I would like to buy the Apple Thunderbolt display (which would solve this issue), but I suspect it will may refreshed soon. So I don't intend to get one until then.
Info:
MacBook Air
I know there have been a couple other threads on this from a couple months ago but I need to bring this back up... has there been a final verdict that the reason the mini displayport doesnt support audio is due to a hardware limitation or a software limitation?
View 9 Replies View RelatedNot sure if there is anything newer firmware than 1.02 but I need ~something~ to drive my new minty Eizo 30" on my unibody MBP
View 11 Replies View RelatedMBP 13" (Late 2011) --> Moshi MDP to HDMI Adapter --> iogear 4x1 HDMI Matrix --> LG 24" LED DIsplayÂ
Xbox 360 and Tivo are also on HDMI MatrixÂ
I dock the MBP with all my cabling, close it, and use a Wireless Apple Magic Mouse and Wireless Apple Keyboard with it. If I switch to port 2 or 3 on the matrix, the MBP will sleep. I have installed both smartSleep and InsomiaX to try and prevent this from happening. The MBP needs to run 24/7, even if that might be damaging. To mitigate heat issues I run smcFanControl to change the minimum speed of the fan to a higher level. The Xbox 360 and Tivo access music on this Mac, and so if it is sleeping; it kind of defeats the intention I am going for here. The iogear has no possible way of signalling the MBP to sleep. Also a Gefen HDMI Detective is not a reasonable fix. Also FWIW: This happens even if I physically unplug the cable, not just if I switch the port on the matrix. Kudos to the first person who finds a permanent fix for this issue. Â
tl;dr - Prevent Macbook Pro from sleeping on Mini-DisplayPort disconnection.
Info:
MacBook Pro, Mac OS X (10.7.3)
I have an early 2011 MacBookPro 17" running Lion (OSX 10.7.3)Â
Anytime I plug *anything* into the Thunderbolt port, the temperature jumps up by 15C-20C.Â
To be specific, if I plug a "DisplayPort->HDMI adpater" in even if it's not connected to an actual display the temparature increases.Â
SMC reset and EFI updates don't seem to help resolve the problem.  some users have reported that "InsomniaT" is sometimes the cause of the problem, however I don't have this sofware installed.Â
Info:
MacBook Pro, Mac OS X (10.7.3), Early 2011 17"
I own a MBP 13 that I wish to connect with my Acer external mobitor. I bought a miniDisplayport to HDMI [male] cable for this purpose. Now the problem I am facing is that even though my 40" Samsung TV detects the MBP and works as an extended monitor, the MBP fails to detect the Acer monitor. However, I currently use the Acer monitor with my Mac Mini, Tata Sky+ set top box and also my Playstation 3
Info:MacBookPro, Mac OS X (10.7.4)
In a month or so I'm going to need to do a Keynote presentation with a projector. I have the new MacBook, so I need the Mini DisplayPort to VGA Adapter. It doesn't seem to be getting good reviews though (many saying it doesn't work for them). I will not be able to test it out with the project until the day of the presentation. Is there any other way to connect the MacBook to what I assume will be a basic projector?
View 4 Replies View RelatedWas thinking of trying to run this through my Onkyo SR-805 receiver to my plasma: [URL] Is this the best option available?
View 5 Replies View RelatedI just got a new MBP, and I like to use my notebooks connected to my HDTV for movie watching and some occasional gaming. I was looking around at cables (mostly at monoprice) and no one seems to have a mini displayport -> hdmi cable that will carry the audio signal.
Has anyone seen them available online?
I've got a Mini DisplayPort on my late 2008 MBP and I've got an MDP to HDMI adapotor that's meant to be audio ready. I can't get it working with audio (ok with display) and HDMI isn't in the sound output menu.
Info:
MacBook Pro, Mac OS X (10.7.3)
I had not used my external monitor in the last several weeks. I believe there have been a few OSX Lion updates since the last time I used the external monitor. I had installed all the updates prior to connecting my external monitor again. However, a few days ago I tried to connect the external monitor and all I get is a "No Signal" message on my external monitor. The Mini DisplayPort to HDMI works on my LCD TV, so I know the MDP works. I have also replaced the MDP-to-DVI cord and the external display still doesn't work.Â
I connected the external monitor to another computer running Snow Leopard and the external monitor works. So, the external monitor does work.Â
I have seen a few posts aboout this, but nobody seems to have a solution that works or is directly on point to my issue. I have tried to use all the scenarios for plugging in the external monitor and external monitor power. I tried to reboot the laptop with and withoout the external monitor connected. Same thing with the exteernal monitor plugged in and no power, etc. Nothing works. I have tried to repeatedly turn the external monitor on and off while connected to the MacBook. Again, that doesn't work. Here is what I am running:Â
MacBook, Aluminum 13" Late 2008
OSX 10.7.3
NVIDIA GeForce 9400M
Info:
MacBook (13-inch Aluminum Late 2008), Mac OS X (10.7.3)
Does the "Mini DisplayPort to VGA Adapter" work with all Samsung tv models?
Info:
MacBook Pro, Mac OS X (10.6.8)
I bought 2 new Macbook Pro 13' , 2.9 Ghz Intel Core i7, with 8 Go 1600Mhz DDR3, Intel HD Graphics 4000 512 MB, Mac OS X Lion 10.7.4 (11E2617).Â
I have connected a Mini DisplayPort to VGA Adapter in order to show presentations on different LCD projectors but no image appear.Â
The external monitor is detected but no image is shown. I have tried to change the frequencies: parts of the screen appears but no a correct image. I have the same symptoms with the 2 Macbook Pro. Using old Macbook Pro with the same Mini DisplayPort to VGA Adapter, the slides are showns normally.Â
I make a test with a Mini DisplayPort to DVI Adapter and with a Mini DisplayPort to HDMI Adapter and everythings works correctly with both adapters. Â
Info:
MacBook Pro, Mac OS X (10.7.4)
I have a MacBook Pro 2012 (Lion) and am connecting to my monitor via the mini displayport and a VGA adapter. This worked fine for a while, but now is intermittent. It's not the cable or the monitor as I have tried with several and get same results. The port works fine with an Apple monitor and no adapter. I've seen several threads on this, but no solutions other than starting up with monitor plugged in which I've done.I updated the OS and it worked fine yesterday, but today not working again.
Info:
MacBook Pro, Mac OS X (10.7.4)
I have a presentation tomorrow and need to hook up my MBP to the projector in class. I bought an Apple Mini Displayport to DVI cable, and a DVI to DVI cable. I thought this would be the case, but come to find out the system does not support DVI. So I had to run to Best buy to get a DVI to VGA cable. I tried out the MDP > DVI > VGA rig on my external monitor and got nothing. The screen on my MBP responded by turning blue for a second and then back to normal...but the monitor said "No Signal". Is this some jargon with DVI-D and DVI-I? I need to know by tomorrow morning if I have to run back to the Apple Store and get a Mini Displayport to VGA cable.
View 7 Replies View RelatedI just hooked the cable up, and I get the standard Purple Haze in space desktop that I have on my Macbook, but nothing else. No icons, no toolbars, nothing. The only time I was able to get anything to come up on my larger screen was when I went into Preferences, and Desktop and Screensaver. When I click on that, I did get a box to show up on my larger screen, listed as the Secondary Desktop.
How exactly do I get the larger screen to serve as my main screen? When I close up my laptop,the larger screen goes blank. I have no idea what to do, please help!
Another question I have is how the screen will look once I do actually get it to work. The reason why I ask that is because my larger screen is an old 17" Dell, the old 4:3 box kind. I plan on upgrading to a 20" plus HD display in the near future, but cannot at the moment, so the current 17" will have to do.
Anyhow, just curious if the screen is going to be completely wonky looking given the resolution that my Macbook will be feeding it?
I want to run a hdmi signal over a long distance and was going to use a cat5 cable but can't find a mini displayport to cat5 converter or a hdmi to cat5 converter. I'm not sure this is even possible, but don't know why it wouldn't be because you can stream HD content over the internet using cat5. And a long cat5 cable is a lot cheaper than hdmi cables and extenders.
View 11 Replies View Related