I just want to change the timing before it goes to sleep so the screen stays active whiteout me putting in input of some kind. My computer times out very quickly while I'm doing work so I then have to login when I go back to use it. It doesn't last longer than a couple of minutes (if that). I just got this MacBook Air and am unfamiliar with MacBooks.
Info:
MacBook Air, iOS 7.1.2
I own a early 2011 edition of MBP, with 2.3 Ghz i5 processor and 4 GB ram. Everytime it wakes up from the sleep mode, it heats up with the internal fans constantly on.. Moreover, the estimated battery life shows as 2 hours even when the percentage is 97%.. However, when I restart the MBP, the heating stops and the battery life shows 5 hours..
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.4)
When I run my macbook pros Battery down, there comes the low battery warning. After a while the system just goes down without suspending anything to my harddisk. When I restart my computer it does a normal start and after logging in I'm experiencing a lot messages due to the reset time. I correct my system-time and restart my mac and the system is back to normal.
Usually I'd say: Replace your CMOS-Battery (I know I have an EFI-Firmware), but where is it?. Or in other words: Is there a "System"-Battery, that would prevent my mac from forgetting the time?
Since I'm not running down my battery to 0 very often I only experience this issue from time to time and never took time to do anything about it.
iStats battery-Status says: Health:83%, Cycles:333, charge 50%...
Info:
MacBook Pro, Mac OS X (10.6.8), 2,5GHz 8GB Ram
I'm having a problem with my PowerBook G4 where is goes into sleep mode at random times. Mostly when I am streaming video..or at times the fan comes on, it sounds super high then boom. sleep mode again. After hitting the space bar, it comes back on, but it'll happen again shortly after. I've played with the sleep settings
View 5 Replies View RelatedAs of last night, my MBP started acting very strangely. After entering my username and password, it would enter the desktop for a short period of time and then kick back into sleep mode; the screen would turn back to black. Sometimes it will let me stay on the desktop for a long time and other times it will hardly let me stay on the desktop. I called apple support and they had me start the computer in safe mode; even then it occasionally kicks me out.
The tech guy said that it was a "strange software issue" and not a hardware issue. I thought it was a hard drive issue; my hard drive makes an odd sound when it unlocks (a grinding sound), but it has been doing that for quite some time with no issues. I tried to reset the SMC and it didn't do anything.
How should I remedy this problem? Is this a hard drive issue? Hard drive failure? Has the grinding sound finally caught up with me? I am running OS X; not leopard or snow leopard. I know I need to upgrade, but this shouldn't be happening.
I recently got myself a Time Capsule. There is just one issue. Once my macbook returns from sleep, time machine immediately looks for the time capsule drive. It gives up looking before my mac even finds the time capsule airport connection. Shortly after it gives up, my macbook finds the airport connection. The result: it delays the next backup for the next hour. Which is not very practical. When I get home from work, I want the time machine to back up immediately once I open it, and not having to use it for another hour or manually do the backup. If time machine just waited about 3 more seconds my macbook would have already established the airport connection and time machine would find the time capsule drive.
View 3 Replies View RelatedWhy does my screen saver stay all of the time? It never goes to sleep. What do I need to do to correct this??
Info:
iPad, Mac OS X (10.7.2)
Since i got my 24" imac back 2 years ago, i always put it into sleep mode. I upgraded to SL a couple weeks back. Just in the past 2 days, when i put it into sleep mode, it takes a while for it to actually perform this operation. Anyone know what might be the problem?
View 8 Replies View RelatedI have a new iMac OS 10.7.3 I am using a SeaGate 1.5 TB external HD for backup.
If I leave the computer on continous everything works fine. It backs up every hour. It has been running fine for over a week. If I set the iMac in energy saver mode, say 10 minutes, when the iMac comes out of sleep mode there is a warning that Time Machine failed.
I get the following errors messages: "Time Machine could not complete the Backup" "Error while creating the Backup Folder"
There is no way to correct it or retry. I have to run disk utility and erase the external HD, re-format, then back everything again.
I would prefer to use the energy save feature of the iMac if I could. I tried the Apple Support number and they just said leave the iMac in "energy saver NEVER" so the iMac stays on continous.
Anyone able to let their IMac go in sleep mode with Time Machine turned on? It seems like a possible bug with 10.7.3?
Info:
iMac, Mac OS X (10.7.3)
My iMac wake unexpectedly from sleep mode then goes back to sleep 00:10-00:15 later. Yosemite is current.
Info:
iMac, Mac OS X (10.6.8)
I am running Mac Mini as a home server (turns out to be not a great idea, btw), and even though I set the preference to never sleep or shut down, it does go to sleep when there is no activity for long time. Since I am using it as home server, it should stay awake all the time or at least wake up from sleep when there is incoming ping from other computer, but it just goes to sleep.
View 5 Replies View RelatedSome trial software gives allows too short time (5 -15 days) to get into it and learn about it.
The question:
Is there any program (or method) which can extend the time restrictions of trial software?
I use Mac with OSX 10.5
My 13" mbp will not sleep?
View 1 Replies View RelatedI am having trouble with my Time Capsule's wireless range. I am not a networking expert by any means. I own an old building that is 4 stories connected by stairs with thick walls.
All the rooms ethernet cables converge in a cubby on the 3rd floor. I placed my Time Capsule in the cubby, but I couldn't receive a wireless signal from the 1st floor. This is ironic because I have an old Netgear G router that sends signals throughout all 4 floors.
So I bought an Airport Express to extend my network wirelessly, but the signal has been unstable perhaps because the Time Capsule's wireless signal is too weak.
So I want to connect the Airport Express on the 1st floor using the Ethernet link from the 3rd floor Time Capsule which is my main router.
From my research, I discovered about WDS networks, which I believe you have to use in order to create a network with multiple Apple base stations linked through ethernet.
I called Applecare who told me:
-To connect from Time Capsule to Airport Express using Ethernet, must use WDS network. Setup Airport Express as Relay, NOT Remote.
-Relay- Direct ethernet connection from Time Capsule to Airport Express, then wireless connection from Airport Express to Macbook.
-Remote- Wireless signal from Time Capsule to Airport Express, then direct Ethernet connection from Airport Express to Macbook
I have several questions for you wise people out there:
1. To extend the Time Capsule wireless network using the Airport Express, but connected directly via ethernet, do I need to setup a WDS network?
2. I prefer to just use the simple Apple settings "extend network wirelessly". Will this setting only boost a wireless signal received from the Time Capsule? Can it not extend a wireless signal sent directly from Ethernet?
3. I'm considering getting a Quickertek Triband antenna to place outside the cubby. Anyone have any experience with Airport external antennas?:
[URL]
Any information would be much appreciated! These networking issues have been giving me months of headache.
Airport Express N version
Connected with 2.4ghz. band to N capable Macs.
after reading a lot manuals and threads I'm now completely lost and can't get it run.
This is what I'd like to do:
1. I have Linksys router set up as wifi hotspot
2. My iMac accesses internet via wifi via linksys
3. I'd like to hook time capsule via ethernet cable to my imac
4. i want time capsule to use my iMac's internet but extend at the same time the wifi internet access
a. Can I backup from iMac to time capsule via ethernet?
b. Which settings I have to do on my iMac and which on time capsule to get my scenario run ?
I sometimes forgotten to unplug the device before closing the lid. Such as when I'm in a hurry and close the lid of the MBP, only then realize that my iPhone is still attached.
I don't want to put unnecessary stress on the harddrive by it going to sleep, waking up, then sleep again just because that unplugging an USB device woke it up. I notice that this does not happend on my Windows laptop.
Just wondering as I've heard a few people just let them sleep I always shut mine down?
MacBook Pro 13"
iPad 32GB 3G
iPhone 4
Whenever I close the lid to my MacBook it'll go to sleep by turning off the harddisk and the light is blinking. But when I go to pick it up or even move it the Superdrive makes a noise as if its searching for a disk and the apple on the lid/monitor blinks on and off. Basically the computer never really stays in sleep mode.
View 24 Replies View RelatedThis is the second time this has happened. I shut my macbook expecting it to go to sleep. I then put it in its booq sleeve and put it in my back pack. About 40 minutes late I pull it out of the case and it is WAY hot and the fan is going like crazy. I open it up and I cant do anything, I think because it is over heated. What is the deal?
View 24 Replies View Relatedmy macbook pro just started ti wake up from sleep on its own, about 1 minute after i put it to sleep it will wake up and shut down, why is that? it never happened before.
View 8 Replies View RelatedI was using my Macbook Pro, finished, put it to sleep and left for a few hours. When I came back it was off. I try to turn it on and the power light comes on and I can hear the disk for about 3 second and then it just shuts off again. I searched the apple support site for this problem and I've done these things. [URL]. I play computer games on it and often the battery would drain. I would plug it in when the 10 minute warning came up, and the little light on the MagSafe plug would turn from green to amber. Lately it had been turning back to green even though the battery icon on the screen said the battery wasn't charged, sometimes the computer would even shut down even though it was plugged in (again, it was plugged in and the light was green, even though the battery icon said it wasn't charged). Maybe it's related to my computer not turning on?
View 1 Replies View RelatedI have an older style MBP, 2.2, running 10.4.3, and the other day after using it about an hour I put it to sleep. After another hour or so I opened it to use it again. Usually just opening it will wake it from sleep. It didnt so I tried pressing any buttons, no luck. Held the power button til it turned off. Tried to boot up but the screen stayed black and the sleep light went on, but did not pulsate. Tried that a few times with the same result. I also tried hooking up an external monitor, just got "no signal".
View 6 Replies View RelatedTo resolve the Macbook Pro 2010 (13") not being able to sleep when the lid is open. I even dl-ed this one app called "Please Sleep" that claimed to solve the issue to no avail. My energy saver power settings have me un-check marking the box that says "turn off hard disks when possible". I have my screen saver kicking in 5 minutes, display sleep going at the 10th minute, and then finally the computer sleep itself at 20 minutes. These are under the "plugged" in condition.
Often times I will leave my lid open, go off and do whatever. Come back to find the screen turned off, and no blinking sleep light. Instead I'll press some keys and find myself on the purple background/initial USER log in screen. Upon logging in all my initial boxes, windows, apps are closed and I am forced to re-open all of them all over. Is it correct to assume that this is a widely recognized issue with the Uni-MBP?
On occasion, my MBP does not "wake up". My only alternative is to restart, Anyone else have this happen? Is there a way to wake up from sleep mode beside a restart?
Info:
MacBook Pro, Mac OS X (10.7.3)
I have a Macbook Pro and it goes into sleep mode when I am actively using it. I set it up to go to sleep in a few hours. This happened within a few minutes twice when I am using the computer.
Info:
MacBook Pro, Mac OS X (10.6.8)
While in a notebook bag will my 2011 17-inch MacBook Pro overheat in sleep mode.
View 2 Replies View RelatedNew mac user, just bought a new MBA -- when should I just close the lid vs shutting it down completely? i.e. is there a general guideline where if you're not going to use it for at least, say, an hour, then shut down but if you are then close the lid, etc. Also let's assume we are talking about the MBA not being plugged in for this scenario but operating off battery.
View 4 Replies View RelatedMy new MacBook Pro 13" keeps going to sleep by itself while I am using it then it won't come out of sleep mode. This is the second one which is causing this problem.
View 3 Replies View RelatedMy mac was in sleep mode, as i turned it on and was putting my password in, it didn't seem to work all that happened was it highlighted my password and when i typed in a wrong password it doesn't even shake anymore. I tried to shut it down but my mac won't shut down or anything!
Info:
MacBook Pro, iOS 7.1.2
My Macbook is frozen in the sleep mode and I can't get to come out. Is there a way do get it out of this mode?
View 3 Replies View Related